# 1.12" Mono OLED Breakout 128x128 **URL:** \ **Category:** Support\ **Created:** [May 31, 2020, 10:28am UTC](https://forums.pimoroni.com/t/1-12-mono-oled-breakout-128x128/14090 "2020-05-31T10:28:47Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\ **Post date:** [May 31, 2020, 1:18pm UTC](https://forums.pimoroni.com/t/1-12-mono-oled-breakout-128x128/14090/4 "2020-05-31T13:18:31Z")
i2c version or SPI version? This is how it went for me with my color SPI LCD, might help. I did finally get it working. > [@1.3 color tft LCD on btreakout garden pHat, SPI i2c](https://forums.pimoroni.com/t/1-3-color-tft-lcd-on-btreakout-garden-phat-spi-i2c/13033): > > I’m trying to get my 1.3" SPI Colour LCD (240x240) Breakout working with a Breakout Garden pHat The Breakout garden Installer didn’t find it, I had to do the manual install from here Running the scrolling-test.py example from idle3 got me a no module named st7789. Running sudo pip3 install st7789 fixed that but gets me a new error message that I think is because its plugged into the breakout garden? Traceback (most recent call last): File “/home/pi/Color LCD/scrolling-text.py”, … --- _[View the full topic](https://forums.pimoroni.com/t/1-12-mono-oled-breakout-128x128/14090)._