# 2.8" Display with PicoW

**URL:** <https://forums.pimoroni.com/t/2-8-display-with-picow/26396>\
**Category:** Support\
**Created:** [October 22, 2024, 1:40pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396 "2024-10-22T13:40:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![half\_biscuit](https://avatars.discourse-cdn.com/v4/letter/h/b5ac83/32.png) [@half\_biscuit](https://forums.pimoroni.com/u/half_biscuit)\
**Post date:** [October 22, 2024, 1:40pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396/1 "2024-10-22T13:40:31Z")

</div>

Apologies in advance for what is probably a very basic question. I just bought a Pimoroni 2.8" display with a picow WH. I have connected it up and can run stuff through Thonny but when I try to run any of the demos from here:

> **[pimoroni-pico/micropython/examples/pico\_display at main · pimoroni/pimoroni-pico](https://github.com/pimoroni/pimoroni-pico/tree/main/micropython/examples/pico_display)**
>
> Libraries and examples to support Pimoroni Pico add-ons in C++ and MicroPython. - pimoroni/pimoroni-pico

Nothing happens. The green LED to the right of the screen flashes once and then nothing.  
I have loaded picow-v1.23.0-1-pimoroni-micropython.uf2 to the picow.

Any clues where I am going wrong?

---

<div class="post-metadata">

**Author:** ![ZodiusInfuser](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/zodiusinfuser/32/10546_2.png) [@ZodiusInfuser](https://forums.pimoroni.com/u/ZodiusInfuser)\
**Post date:** [October 22, 2024, 1:48pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396/2 "2024-10-22T13:48:30Z")

</div>

Hi,

Those examples are set up by default for our original Display Pack. To use them with our newer packs you need to replace all occurrences of `DISPLAY_PICO_DISPLAY` with `DISPLAY_PICO_DISPLAY_2`. If you check the Getting Started section of the product page, that will explain a bit more: [Pico Display Pack 2.8"](https://shop.pimoroni.com/products/pico-display-pack-2-8)

---

<div class="post-metadata">

**Author:** ![half\_biscuit](https://avatars.discourse-cdn.com/v4/letter/h/b5ac83/32.png) [@half\_biscuit](https://forums.pimoroni.com/u/half_biscuit)\
**Post date:** [October 22, 2024, 1:55pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396/3 "2024-10-22T13:55:20Z")

</div>

Yes, I was aware of the DISPLAY\_PICO\_DISPLAY\_2 thing and updated the script accordingly.

---

<div class="post-metadata">

**Author:** ![half\_biscuit](https://avatars.discourse-cdn.com/v4/letter/h/b5ac83/32.png) [@half\_biscuit](https://forums.pimoroni.com/u/half_biscuit)\
**Post date:** [October 22, 2024, 2:22pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396/4 "2024-10-22T14:22:21Z")

</div>

Solved it now, I am indeed an idiot.

I just had the pins sat lightly in the board, I didn’t realise it had to be firmly pushed down. Every day is a school day…

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 22, 2024, 4:59pm UTC](https://forums.pimoroni.com/t/2-8-display-with-picow/26396/5 "2024-10-22T16:59:03Z")

</div>

JFYI you also have to adjust the pin numbers for the RGB LED. ;)
