# 8 LED NEOPIXEL not working

**URL:** <https://forums.pimoroni.com/t/8-led-neopixel-not-working/19374>\
**Category:** Support\
**Created:** [April 25, 2022, 1:03am UTC](https://forums.pimoroni.com/t/8-led-neopixel-not-working/19374 "2022-04-25T01:03:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![geschmierer](https://avatars.discourse-cdn.com/v4/letter/g/e79b87/32.png) [@geschmierer](https://forums.pimoroni.com/u/geschmierer)\
**Post date:** [April 25, 2022, 1:03am UTC](https://forums.pimoroni.com/t/8-led-neopixel-not-working/19374/1 "2022-04-25T01:03:41Z")

</div>

I recently purchased the pantilt-hat kit (without the neostick, I thought it came with). The pantilt servos work fine using the examples in github.  
I purchased the recommended 8 LED NeoPixel strip

# NeoPixel Stick - 8 x 5050 RGBW LEDs - Natural White - ~4500K; Product ID: 2868

I have tried all the examples in github and changed grbw to rgbw which is what this stick is. Nothing is happening. No blink, or light at all.  
I believe my stick is SK6812 and not WS2812B but adafruit says the protocol is same!?

Do I need to purchase a different 8LED stick? Do I need to add circuitypython neopixel?

---

<div class="post-metadata">

**Author:** ![geschmierer](https://avatars.discourse-cdn.com/v4/letter/g/e79b87/32.png) [@geschmierer](https://forums.pimoroni.com/u/geschmierer)\
**Post date:** [April 25, 2022, 6:20am UTC](https://forums.pimoroni.com/t/8-led-neopixel-not-working/19374/2 "2022-04-25T06:20:59Z")

</div>

My mistake. I just brought my Volt meter and realized that I put the signal pin on the OUT side. I thought the pins on both side of the stick were exactly the same. Once I put the Signal wire on the DIN side the Neopixel stick worked.

I still have one question though. when I looked on the github site it appeared that the library is looking for 18 - 24 pins. I do not see a way to specify how many LEDs were on the stick.
