# Adafruit 5" LCD No image

**URL:** <https://forums.pimoroni.com/t/adafruit-5-lcd-no-image/9872>\
**Category:** Support\
**Created:** [February 5, 2019, 10:10pm UTC](https://forums.pimoroni.com/t/adafruit-5-lcd-no-image/9872 "2019-02-05T22:10:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lanca](https://avatars.discourse-cdn.com/v4/letter/l/8797f3/32.png) [@Lanca](https://forums.pimoroni.com/u/Lanca)\
**Post date:** [February 5, 2019, 10:10pm UTC](https://forums.pimoroni.com/t/adafruit-5-lcd-no-image/9872/1 "2019-02-05T22:10:28Z")

</div>

Hi. I bought an Adafruit 5" LCD from you and so far have been having troubles in getting an image. I got it to work once but it seems that even if i fiddle about with the cable plugging it in and out i get sort of an image for less than a second and then it’s black again. I’ve tested the cable and it works well which leads me to think that the LCD HDMI connector might be at fault?

1 - It is connected to a Raspberry Pi Zero W and I’ve followed the instructions from Adafruit in setting up config.txt

2 - It has been connected to 2A USB charger and a 2.1A Power Pack and the power never went down. It’s just the image.

Unfortunately I have been at work for the week so will only be able to try with another HDMI cable tomorrow.

Have you any other ideas I could try?

---

<div class="post-metadata">

**Author:** ![Lanca](https://avatars.discourse-cdn.com/v4/letter/l/8797f3/32.png) [@Lanca](https://forums.pimoroni.com/u/Lanca)\
**Post date:** [February 6, 2019, 9:08am UTC](https://forums.pimoroni.com/t/adafruit-5-lcd-no-image/9872/2 "2019-02-06T09:08:16Z")

</div>

I seem to have found the problem. Might be a faulty micro HDMI to HDMI cable.  
Fingers crossed…

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [February 6, 2019, 11:00am UTC](https://forums.pimoroni.com/t/adafruit-5-lcd-no-image/9872/3 "2019-02-06T11:00:47Z")

</div>

Is that the 5 inch backpack one? What are you using for a power supply, namely what is its current rating?

EDIT: Also, if thats a Pi Zero in the official case, try it with the Pi Zero out of the case. Just as a quick test to see if maybe the mini HDMI isn’t plugging in all the way.
