# Adafruit audio fx sound board with amp

**URL:** <https://forums.pimoroni.com/t/adafruit-audio-fx-sound-board-with-amp/16440>\
**Category:** Support\
**Created:** [February 26, 2021, 4:08pm UTC](https://forums.pimoroni.com/t/adafruit-audio-fx-sound-board-with-amp/16440 "2021-02-26T16:08:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![DavidTurpin](https://avatars.discourse-cdn.com/v4/letter/d/e480ec/32.png) [@DavidTurpin](https://forums.pimoroni.com/u/DavidTurpin)\
**Post date:** [February 26, 2021, 4:08pm UTC](https://forums.pimoroni.com/t/adafruit-audio-fx-sound-board-with-amp/16440/1 "2021-02-26T16:08:52Z")

</div>

> **[Adafruit Audio FX Sound Board - WAV/OGG Trigger – Pimoroni](https://shop.pimoroni.com/products/adafruit-audio-fx-sound-board-2x2w-amp-wav-ogg-trigger-2mb?variant=972768365)**
>
> Add audio/sound effects to your next project, without an Arduino+Shield!

Hello all, new here. I am interested in the above item but am very much a newbie to all of this. I have 2 questions:

Is it possible to put files on this using an Apple Mac computer? The instructions state a Windows computer but I only have a MacBook

Once all connected, is it possible to control the volume going to the speaker?

Thanks

Like I say, I am very much new to this so apologies if I have done anything wrong.

Thanks

David
