# Adafruit Mini PiTFT

**URL:** <https://forums.pimoroni.com/t/adafruit-mini-pitft/12005>\
**Category:** Support\
**Created:** [October 24, 2019, 9:51am UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005 "2019-10-24T09:51:21Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![mamvcivm](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@mamvcivm](https://forums.pimoroni.com/u/mamvcivm)\
**Post date:** [October 24, 2019, 9:51am UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/1 "2019-10-24T09:51:21Z")

</div>

Hi, took delivery of the above yesterday but I cannot get it to work.

I started with the latest Raspbian Buster image on a Pi 3A+ and updated/upgraded it.

I then followed the instructions as per [https://github.com/pimoroni/st7789-python](https://github.com/pimoroni/st7789-python) - i.e.:

_sudo apt-get update_  
_sudo apt-get install python-rpi.gpio python-spidev python-pip python-imaging python-numpy_

However, python-imaging failed but advised to install _python-pil_ instead…

then did _sudo pip install st7789_, however, as I’m using Thonny based on Python 3 I also did _sudo pip3 install st7789_

I’d forgotten to enable spi and i2c so enabled them and rebooted.

I ran sudo Thonny and tried the various examples from the Github page, however, there’s no output from the display, save for the backlight being lit.

What am I missing…?

Cheers,

Andrew

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 24, 2019, 11:34am UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/2 "2019-10-24T11:34:35Z")

</div>

Buster with Desktop or Buster Lite?  
I ask because the Buster Lite image is missing a bunch of stuff. smbus and pip to name a few.

---

<div class="post-metadata">

**Author:** ![mamvcivm](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@mamvcivm](https://forums.pimoroni.com/u/mamvcivm)\
**Post date:** [October 24, 2019, 12:14pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/3 "2019-10-24T12:14:28Z")

</div>

Hi, Buster Desktop…

Ta

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 24, 2019, 12:54pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/4 "2019-10-24T12:54:44Z")

</div>

I’m not sure if this helps or not but here goes.  
I was just playing around with my Fan Shim.  
If I install with sudo pip install fanshim, and try to run some code from Idle3, I get a no module names fanshim error.  
If I install with sudo pip3 install fanshim, everything works from Idle3 / Python3. I think you already know that though.  
I don’t own a mini PiTFT screen so I’m not sure how much more help I can be. Buster seems to have put a wrinkle in things for a lot of people.

---

<div class="post-metadata">

**Author:** ![mamvcivm](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@mamvcivm](https://forums.pimoroni.com/u/mamvcivm)\
**Post date:** [October 24, 2019, 2:09pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/5 "2019-10-24T14:09:24Z")

</div>

Hmmmm, OK, thanks for that, I’ll try an older OS build tonight…

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 24, 2019, 2:16pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/6 "2019-10-24T14:16:48Z")

</div>

You can get the older builds here. I’d try the latest / last Stretch release. If it works you’ll know its a software issue not a hardware issue.  
[http://downloads.raspberrypi.org/raspbian/images/](http://downloads.raspberrypi.org/raspbian/images/)

---

<div class="post-metadata">

**Author:** ![mamvcivm](https://avatars.discourse-cdn.com/v4/letter/m/9d8465/32.png) [@mamvcivm](https://forums.pimoroni.com/u/mamvcivm)\
**Post date:** [October 24, 2019, 8:47pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/8 "2019-10-24T20:47:58Z")

</div>

Still not working under 2019-04-08-raspbian-stretch-full - same result, no errors, backlight on - no other sign of life… :-(

However, just followed [https://learn.adafruit.com/adafruit-mini-pitft-135x240-color-tft-add-on-for-raspberry-pi](https://learn.adafruit.com/adafruit-mini-pitft-135x240-color-tft-add-on-for-raspberry-pi) and the Quickstart Button Test works - more investigation needed…

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 24, 2019, 9:33pm UTC](https://forums.pimoroni.com/t/adafruit-mini-pitft/12005/9 "2019-10-24T21:33:03Z")

</div>

You could try posting this issue on the Adafruit forum, they made it after all. I go by the same username I use here, there as well.
