# Adafruit NeoPixel Ring - 5050 RGB LED with Raspberry Bullseye

**URL:** <https://forums.pimoroni.com/t/adafruit-neopixel-ring-5050-rgb-led-with-raspberry-bullseye/18198>\
**Category:** Support\
**Created:** [November 13, 2021, 1:13pm UTC](https://forums.pimoroni.com/t/adafruit-neopixel-ring-5050-rgb-led-with-raspberry-bullseye/18198 "2021-11-13T13:13:55Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bobster317](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@bobster317](https://forums.pimoroni.com/u/bobster317)\
**Post date:** [November 13, 2021, 1:13pm UTC](https://forums.pimoroni.com/t/adafruit-neopixel-ring-5050-rgb-led-with-raspberry-bullseye/18198/1 "2021-11-13T13:13:55Z")

</div>

I am trying to get Adafruit NeoPixel Ring - 5050 RGB LED with Integrated Drivers – 12 pixel working with Raspberry Pi 4 and the latest bullseye raspberry pi os 32 bit.

Can anyone advise if they have managed to get this workinf?

I previously used the following configuration which worked fine

sudo pip3 uninstall rpi\_ws281x  
sudo pip3 install rpi\_ws281x  
sudo pip3 install adafruit-blinka  
sudo apt-get install python-dev git scons swig  
git clone [GitHub - jgarff/rpi\_ws281x: Userspace Raspberry Pi PWM library for WS281X LEDs](https://github.com/jgarff/rpi_ws281x.git)  
cd rpi\_ws281x  
sudo scons  
cd python  
sudo python3 setup.py build

@reboot sudo python3 /home/pi/rpi\_ws281x//python/examples/strandtest.py &

The pattern starts but then stops.

Can you please advise instuctions/commands to get the neoppixel; ring working

Thanks
