# Adding a bigger display to Enviro+ **URL:** \ **Category:** Raspberry Pi\ **Created:** [November 6, 2022, 3:03pm UTC](https://forums.pimoroni.com/t/adding-a-bigger-display-to-enviro/20671 "2022-11-06T15:03:47Z")\ **Posts on this page:** 1\ **Showing post:** 12
**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\ **Post date:** [November 16, 2022, 10:23pm UTC](https://forums.pimoroni.com/t/adding-a-bigger-display-to-enviro/20671/12 "2022-11-16T22:23:00Z")
A lot of my code is modified Pimoroni examples. It’s where I unusually start. That project evolved into a Pi Pico setup with two Pico Display Pack V2’s. [Pi Pico based Weather Station Project - Discussion / Projects - Pimoroni Buccaneers](https://forums.pimoroni.com/t/pi-pico-based-weather-station-project/19503) The same could be done with two Pi Display Hat Mini’s. And as near as I can tell, you could use a Pico Display Pack with a Pi and vis versa. They both use 3V logic and the same driver chips. I have plans to wire up a Pico Display Pack to a Pi, just have to find my round 2it. ;) I have one of the original 240 x 135 Display Packs sitting there doing nothing. It’s my replacement for the Enviro’s 160 x 80 LCD. It’s close to the same width versus height ratio. I’ll likely use something like this to mate the two. [Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x2 - Pimoroni](https://shop.pimoroni.com/products/adafruit-perma-proto-40-pin-raspberry-pi-breadboard-pcb-kit-with-2x20-header?variant=29498828095571) It’s what I did here, it’s running Enviro+ code. It’s 3 displays instead of just one. ![Front View](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/1/19072f67af206b8897b6a1910486dcb330a49abb.jpeg) I thought I had a thread on this but can’t find it? --- _[View the full topic](https://forums.pimoroni.com/t/adding-a-bigger-display-to-enviro/20671)._