# Airquality and breakout garden

**URL:** <https://forums.pimoroni.com/t/airquality-and-breakout-garden/8499>\
**Category:** Learning Resources\
**Created:** [August 26, 2018, 11:05am UTC](https://forums.pimoroni.com/t/airquality-and-breakout-garden/8499 "2018-08-26T11:05:26Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [August 26, 2018, 7:45pm UTC](https://forums.pimoroni.com/t/airquality-and-breakout-garden/8499/4 "2018-08-26T19:45:52Z")

</div>

Have a look at this, may or may not help, kind of explains why they went the way they did though.

> [@BME680 IAQ Direct Output, how?](https://forums.pimoroni.com/t/bme680-iaq-direct-output-how/8450):
>
> Hello, I have the BME680 and on the RaspberryPi I am using Python3 and the Pimoroni module. I would like to use the Direct Output the BME680 has for IAQ from the Gas Sensor. As per the Bosch documents, it specifies this is possible. Output data processing : direct output of IAQ: Index for Air Quality [https://www.bosch-sensortec.com/bst/products/all\_products/bme680](https://www.bosch-sensortec.com/bst/products/all_products/bme680) I cannot see in the module how to call that, there is just a method for what looks like a home made IAQ number.? Thanks.

---

_[View the full topic](https://forums.pimoroni.com/t/airquality-and-breakout-garden/8499)._
