# Automation HAT case

**URL:** <https://forums.pimoroni.com/t/automation-hat-case/6497>\
**Category:** Support\
**Created:** [November 30, 2017, 6:41pm UTC](https://forums.pimoroni.com/t/automation-hat-case/6497 "2017-11-30T18:41:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![swalker2001](https://avatars.discourse-cdn.com/v4/letter/s/919ad9/32.png) [@swalker2001](https://forums.pimoroni.com/u/swalker2001)\
**Post date:** [November 30, 2017, 6:41pm UTC](https://forums.pimoroni.com/t/automation-hat-case/6497/1 "2017-11-30T18:41:29Z")

</div>

Just created my first project using a Pi 3 with Automation HAT. It was simple to get it working. What’s not so simple is finding a case that will work with it. I’m sure there are plenty out there but I don’t have a local resource where every case ever made is available for me to examine.

Can you point me in a direction that will help me find something that will hold the Pi 3 with Automation Hat and give me access to the terminals or has enough room inside that I can run a cable or two into the case and make the connections to the relay outputs?

Thanks!

Steve