# Automation HAT PWM

**URL:** <https://forums.pimoroni.com/t/automation-hat-pwm/14345>\
**Category:** Support\
**Created:** [June 24, 2020, 2:54pm UTC](https://forums.pimoroni.com/t/automation-hat-pwm/14345 "2020-06-24T14:54:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![appdoc](https://avatars.discourse-cdn.com/v4/letter/a/e99b99/32.png) [@appdoc](https://forums.pimoroni.com/u/appdoc)\
**Post date:** [June 24, 2020, 2:54pm UTC](https://forums.pimoroni.com/t/automation-hat-pwm/14345/1 "2020-06-24T14:54:00Z")

</div>

Thanks in advance for your help. I saw this post regarding PWM w/ the Automation HAT: [0-10 VDC control voltage. Possible with automation HAT?](https://forums.pimoroni.com/t/0-10-vdc-control-voltage-possible-with-automation-hat/4028)

However, I wasn’t able to make it work with my MD13S. My motor controller is connected to the 1st digital channel and I’ve implemented the code from that other post. I have a feeling there’s some other bit that I’ve missed…
