# Automation HAT & Raspberry Pi PICO?

**URL:** <https://forums.pimoroni.com/t/automation-hat-raspberry-pi-pico/24814>\
**Category:** Support\
**Created:** [May 16, 2024, 4:26am UTC](https://forums.pimoroni.com/t/automation-hat-raspberry-pi-pico/24814 "2024-05-16T04:26:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![m4nuelz](https://avatars.discourse-cdn.com/v4/letter/m/a5b964/32.png) [@m4nuelz](https://forums.pimoroni.com/u/m4nuelz)\
**Post date:** [May 16, 2024, 4:26am UTC](https://forums.pimoroni.com/t/automation-hat-raspberry-pi-pico/24814/1 "2024-05-16T04:26:07Z")

</div>

Hi! I’m just getting started with the Raspberry Pi Pico. I recently purchased the Automation HAT Mini, and since I was able to use it with my Raspberry Pi 3+, I’m wondering if it’s compatible with the Pico. Is it simply a matter of connecting the pins correctly?

I couldn’t install the automationhat library on my PC to use it with Thonny as the script must be run on raspbian on a raspberry pi.

As far as I investigated I could connect it to my PICO following the pinout, but i would need to make my own library to use it.

Is this possible?

Thanks!

---

<div class="post-metadata">

**Author:** ![ahnlak](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ahnlak/32/5610_2.png) [@ahnlak](https://forums.pimoroni.com/u/ahnlak)\
**Post date:** [May 16, 2024, 8:50am UTC](https://forums.pimoroni.com/t/automation-hat-raspberry-pi-pico/24814/2 "2024-05-16T08:50:55Z")

</div>

Theoretically yes, but it would involve a fair bit of heavy lifting - the considerably easier approach would be to grab a [Automation 2040 W Mini (Pico W Aboard)](https://shop.pimoroni.com/products/automation-2040-w-mini) instead :-)

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [May 16, 2024, 3:19pm UTC](https://forums.pimoroni.com/t/automation-hat-raspberry-pi-pico/24814/3 "2024-05-16T15:19:27Z")

</div>

You could try something like this: [Pico to Pi HAT | The Pi Hut](https://thepihut.com/products/pico-to-pi-hat)

I never tested that one, since I have built an adapter like this myself ([GitHub - bablokb/pcb-pico-pi-base: An Interface PCB to use Pi-Hats with a Pi-Pico(w)](https://github.com/bablokb/pcb-pico-pi-base)). But with the exception of the Hyperpixel displays I managed to get every HAT working. Depending on the specific HAT, there was more or less work for porting the drivers.
