# Badger2350 Removing Polycarbonate case/Lipo Connector

**URL:** <https://forums.pimoroni.com/t/badger2350-removing-polycarbonate-case-lipo-connector/28665>\
**Category:** Support\
**Created:** [February 4, 2026, 10:41am UTC](https://forums.pimoroni.com/t/badger2350-removing-polycarbonate-case-lipo-connector/28665 "2026-02-04T10:41:37Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [February 4, 2026, 6:51pm UTC](https://forums.pimoroni.com/t/badger2350-removing-polycarbonate-case-lipo-connector/28665/3 "2026-02-04T18:51:50Z")

</div>

Thanks for the video. I was a bit impatient and just used a small screw-driver, inserting it in the holes in the back. It magically worked, without force.

Once off, I could see the connector and the type of the LiPo and that also led me to the Molex.

One more questions: how do I remove the LiPo? It seems to be glued to the PCB. I don’t want to work with heat. But that is something for the future, I expect the LiPo to last a while (it is rated for 500 charge cycles).

---

_[View the full topic](https://forums.pimoroni.com/t/badger2350-removing-polycarbonate-case-lipo-connector/28665)._
