# Can the Inky Impression boards be used with MicroPython?

**URL:** <https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935>\
**Category:** Support\
**Created:** [June 19, 2025, 8:49pm UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935 "2025-06-19T20:49:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![mattdm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/mattdm/32/11650_2.png) [@mattdm](https://forums.pimoroni.com/u/mattdm)\
**Post date:** [June 19, 2025, 8:49pm UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/1 "2025-06-19T20:49:56Z")

</div>

I have something on an older Inky Frame that I’d like to update to the new 13.3" Inky Impression. I see the Impression getting-started guide discusses Rasbian. I don’t want to deal with a whole OS (that’s my day job!). Can I just use MicroPython?

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [June 20, 2025, 5:33am UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/2 "2025-06-20T05:33:52Z")

</div>

Theoretically, yes. I use the Inky-Impressions with CircuitPython running on a Pico-W. You need two things:

- an adapter or some smart wiring mapping the pins of the Inky to your device
- a software driver for MicroPython

For the large 13.3" you would certainly opt for a device with a lot of RAM, e.g. the Pico Plus 2W.

For the adapter, you probably can use this one: [Pico to Pi HAT - The Pi Hut](https://thepihut.com/products/pico-to-pi-hat?variant=43157745434819). I haven’t used it, so there is no guarantee that it works - you should definitely check the pin-mapping first.

Since Pimoroni is planning to also make a new generation of Inky-Frames with the new displays, you can expect that the MP-drivers will pop up some day too. Until then, you are probably on your own.

---

<div class="post-metadata">

**Author:** ![mattdm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/mattdm/32/11650_2.png) [@mattdm](https://forums.pimoroni.com/u/mattdm)\
**Post date:** [June 20, 2025, 1:37pm UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/3 "2025-06-20T13:37:28Z")

</div>

Nice, thanks. Are the pins documented somewhere?

In the meantime, I’ve got it going using a Pi Zero, but it seems a horrible shame to use an e-ink display with a device always sucks power. I want something that can wake up once a day, update the screen, then power off.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [June 20, 2025, 2:21pm UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/4 "2025-06-20T14:21:07Z")

</div>

> [@mattdm](#):
>
> Are the pins documented somewhere?

There is a link on the product page to the schematic, there you will find the used pins. Another option is [https://pinout.xyz](https://pinout.xyz), but this only documents an old Inky. But I think the pins haven’t changed.

> [@mattdm](#):
>
> I want something that can wake up once a day, update the screen, then power off.

When I started with the Inky-Impression, I had the same goal. You can have a look at my projects here: [GitHub - bablokb/pi-e-ink-daily: Display Daily Agenda on an E-Ink Display](https://github.com/bablokb/pi-e-ink-daily) and here: [GitHub - bablokb/pcb-pi-batman: A simple hat for battery based Pi projects](https://github.com/bablokb/pcb-pi-batman)

That worked well with the Pi-Zero, but compared with a Pico, it still sucks too much power. A Pi-Zero2-W is probably the best compromise, because it boots faster and the uptime is the main driver of energy consumption.

---

<div class="post-metadata">

**Author:** ![mattdm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/mattdm/32/11650_2.png) [@mattdm](https://forums.pimoroni.com/u/mattdm)\
**Post date:** [June 20, 2025, 9:03pm UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/5 "2025-06-20T21:03:54Z")

</div>

Oooh, I found [GitHub - bablokb/circuitpython-inky: CircuitPython Drivers for various Pimoroni E-Ink Displays](https://github.com/bablokb/circuitpython-inky). That looks promising!

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [June 21, 2025, 9:18am UTC](https://forums.pimoroni.com/t/can-the-inky-impression-boards-be-used-with-micropython/27935/6 "2025-06-21T09:18:47Z")

</div>

Yes, this is for CircuitPython, not MicroPython. I ported the Pimoroni Pi-driver for the 7.3" Spectra6 display to CircuitPython. I don’t have the 13.3", so there is no driver available yet but porting should be very similar.
