# Can use Enviro+ with PMS5003 and phat stack

**URL:** <https://forums.pimoroni.com/t/can-use-enviro-with-pms5003-and-phat-stack/13415>\
**Category:** Support\
**Created:** [March 27, 2020, 11:30pm UTC](https://forums.pimoroni.com/t/can-use-enviro-with-pms5003-and-phat-stack/13415 "2020-03-27T23:30:26Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [March 28, 2020, 9:15am UTC](https://forums.pimoroni.com/t/can-use-enviro-with-pms5003-and-phat-stack/13415/2 "2020-03-28T09:15:34Z")

</div>

You’ll have to manually compare the pinouts for conflicts. I see lots of conflicts between the Enviro+ and the other two. The Unicorn HD should work with the pHat Beat OK, neither one will work with the Enviro though, from what I’m seeing.

> **[Enviro Plus at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/enviro_plus#)**
>
> A package of environmental sensors for IoT projects

> **[Unicorn HAT HD at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/unicorn_hat_hd#)**
>
> A matrix of 256 RGB LED pixels for the Raspberry Pi

> **[pHAT BEAT at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/phat_beat#)**
>
> Stereo I2S DAC, AMP and VU meter

---

_[View the full topic](https://forums.pimoroni.com/t/can-use-enviro-with-pms5003-and-phat-stack/13415)._
