# Claude Buddy for Badgeware

**URL:** <https://forums.pimoroni.com/t/claude-buddy-for-badgeware/29344>\
**Category:** Projects\
**Created:** [November 14, 2026, 4:46am UTC](https://forums.pimoroni.com/t/claude-buddy-for-badgeware/29344 "2026-11-14T04:46:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fsi](https://avatars.discourse-cdn.com/v4/letter/f/c5a1d2/32.png) [@fsi](https://forums.pimoroni.com/u/fsi)\
**Post date:** [November 14, 2026, 4:46am UTC](https://forums.pimoroni.com/t/claude-buddy-for-badgeware/29344/1 "2026-11-14T04:46:09Z")

</div>

A [Claude Desktop Hardware Buddy](https://github.com/anthropics/claude-desktop-buddy) for Pimoroni’s [Badgeware](https://badgewa.re/) badges. It pairs over Bluetooth LE with Claude Desktop on macOS or Windows, shows what Claude is doing, and lets you **accept** or **deny** permission prompts from the badge’s buttons.

Supports both the Badger 2350 and the TUFTY 2350

> **[GitHub - freemansoft/claude-buddy-badgeware: Claude Buddy - firmware for the badger 2350 E-Ink....](https://github.com/freemansoft/claude-buddy-badgeware)**
>
> Claude Buddy - firmware for the badger 2350 E-Ink. (not yet tested for Tufty 2350)

---

<div class="post-metadata">

**Author:** ![fsi](https://avatars.discourse-cdn.com/v4/letter/f/c5a1d2/32.png) [@fsi](https://forums.pimoroni.com/u/fsi)\
**Post date:** [November 15, 2026, 12:43am UTC](https://forums.pimoroni.com/t/claude-buddy-for-badgeware/29344/2 "2026-11-15T00:43:25Z")

</div>

The only part that seems weird is the inability to power down the device after some period of time while on battery.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [November 15, 2026, 5:28am UTC](https://forums.pimoroni.com/t/claude-buddy-for-badgeware/29344/3 "2026-11-15T05:28:31Z")

</div>

I wouldn’t call that “weird”. It is a hardware design decision (IMHO a bad one). But it will only make a difference if you don’t use your device for a long time, since power draw in deep-sleep mode is low (something like 170µA@3.6V).

For a stationary device, I would just open the case, remove the battery and power it via usb.
