# Clipper LTE 4G Breakout

**URL:** <https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847>\
**Category:** Support\
**Created:** [September 28, 2024, 11:11am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847 "2024-09-28T11:11:51Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![4g\_module](https://avatars.discourse-cdn.com/v4/letter/4/bb73d2/32.png) [@4g\_module](https://forums.pimoroni.com/u/4g_module)\
**Post date:** [September 28, 2024, 11:11am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/1 "2024-09-28T11:11:51Z")

</div>

Hi, the 4G module appears to have the wrong price on it:

> **[Clipper LTE 4G Breakout (SP/CE) - Starter Kit](https://shop.pimoroni.com/products/clipper-breakout?variant=42180720459859)**
>
> Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.

It should be \>£60.

Also, how do I connect to this? Is it serial port? There is no clear explanation on the Pimoroni page.

Thanks.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [September 28, 2024, 1:06pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/2 "2024-09-28T13:06:18Z")

</div>

They are talking about controlling via AT, and that is serial. The SP/CE exposes UART, so that is the way to go.

---

<div class="post-metadata">

**Author:** ![Shoe](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Shoe](https://forums.pimoroni.com/u/Shoe)\
**Post date:** [September 28, 2024, 1:24pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/3 "2024-09-28T13:24:18Z")

</div>

> [@4g\_module](#):
>
> It should be \>£60.

Yeah I was very surprised by that, makes you wonder why everyone else is way over that. It’s very much in “fun tinkering if I had the time for it” territory.

Interesting too that Pimoroni are managing the topups.

---

<div class="post-metadata">

**Author:** ![4g\_module](https://avatars.discourse-cdn.com/v4/letter/4/bb73d2/32.png) [@4g\_module](https://forums.pimoroni.com/u/4g_module)\
**Post date:** [September 28, 2024, 1:49pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/4 "2024-09-28T13:49:54Z")

</div>

I googled this SP/CE thing and found no links.

Seems like some ultra-proprietary Pimoroni thing which makes me sad.

---

<div class="post-metadata">

**Author:** ![Shoe](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Shoe](https://forums.pimoroni.com/u/Shoe)\
**Post date:** [September 28, 2024, 2:58pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/5 "2024-09-28T14:58:57Z")

</div>

It’s more just an arrangement of ordinary GPIO/SPI pins on a connector. If you go to the [Plasma 2350 board](https://shop.pimoroni.com/products/plasma-2350?variant=42092628246611), there’s a pinout diagram that shows you the order:

> 5V, 3v3, CS, SCK, TX, RX, BL, GND

I think BL is just a PWM pin for screen backlights. The physical socket looks like JST-SH.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [September 29, 2024, 5:23am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/6 "2024-09-29T05:23:52Z")

</div>

Yeah, I had to ask Pimoroni what SP/CE stands for (you can find it somewhere in this forum, I already forgot).

Basically, it is JST-SH (8 pin), so at least this is non proprietary. Sourcing cables with a plug on one side is easy, so it is not that bad. It does expose some GPIOs, but I think it is more or less useless except for Pimoroni stuff. It doesn’t even have enough pins to drive 4-wire SPI displays, and that would really be a good use-case for an external connector.

Biggest drawback: it increases the height of the boards. Look at the Pico Plus 2: you cannot solder it to a support PCB, even when you add headers (I wonder why they produce this board with castellated holes). The headers were enough for the Pico Plus, but now you really need sockets, which increases your build considerably.

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 1, 2024, 10:11am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/7 "2024-10-01T10:11:42Z")

</div>

Has anyone made this work yet? I have the Clipper 4G connected via SP/CE to a Plasma 2350. I’ve loaded the uf2 from here ([https://pimoroni.com/mp-temp/pico\_plus2\_rp2350\_wireless-55684ff3bef0191d4a92c22c1a5837d4dbd4e685-pimoroni-micropython.uf2.zip](https://pimoroni.com/mp-temp/pico_plus2_rp2350_wireless-55684ff3bef0191d4a92c22c1a5837d4dbd4e685-pimoroni-micropython.uf2.zip)) and tried the example python code. I just get …

> - AT TIMEOUT   
> cellular module timed out for command AT
> - AT TIMEOUT   
> cellular module timed out for command AT
> - AT TIMEOUT   
> cellular module timed out for command AT

I get the same message if the Clipper is not plugged in, incidentally!

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [October 1, 2024, 10:28am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/8 "2024-10-01T10:28:09Z")

</div>

I think it has to do with the pins used for the SP/CE: they are different for the Plasma2350 compared to the Pico2+. Can you set the UART-pins for the UART-connection to the clipper or is this hard-coded in the library?

Edit: see [pimoroni-pico-rp2350/micropython/modules\_py/lte.py at feature/can-haz-ppp-plz · pimoroni/pimoroni-pico-rp2350 · GitHub](https://github.com/pimoroni/pimoroni-pico-rp2350/blob/feature/can-haz-ppp-plz/micropython/modules_py/lte.py) You can pass in your own UART. You need to initialize it the same as for the default.

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 1, 2024, 10:31am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/9 "2024-10-01T10:31:25Z")

</div>

Argh. I assumed that SP/CE was just SP/CE (i.e. standard!). The UART is hard coded in the library as far as I can tell. But I might be able to twiddle it somewhere. It (the Plasma2350) was the only mcu board I could see with the SP/CE interface.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [October 1, 2024, 10:32am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/10 "2024-10-01T10:32:30Z")

</div>

See my edit above, I added the link.

SP/CE is no standard, it is just a connector that exposes a number of pins.

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 1, 2024, 10:40am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/11 "2024-10-01T10:40:19Z")

</div>

I’m out of my depth now :-) I’ll see what I can make of that link. Thanks!

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [October 1, 2024, 10:45am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/12 "2024-10-01T10:45:06Z")

</div>

The LTE class accepts an `uart` argument:

```auto
myuart = UART(...)
lte = LTE(uart=myuart)

```

The params to UART are (here a copy of the defaults, you have to change the `DEFAULT_PIN_xx`-stuff to the pins of the Plasma2350):

```auto
myuart = UART(
            DEFAULT_UART_ID,
            tx=Pin(DEFAULT_PIN_TX, Pin.OUT),
            rx=Pin(DEFAULT_PIN_RX, Pin.OUT))

```

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 1, 2024, 10:49am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/13 "2024-10-01T10:49:56Z")

</div>

Brilliant! Thanks a million. I’ll give it a go.

My _hope_ was that since the Clipper and Plasma 2350 are together on the shop page, they would just work with the example code!

That would be too simple :-)

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [October 1, 2024, 11:08am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/14 "2024-10-01T11:08:14Z")

</div>

I think they just can’t imagine that a Plasma is used for something else then driving LEDs. And to be honest, it _is_ a border-case after all.

All the LTE stuff is in it’s very beginning. For example, there is no available AT command manual. When I click the link on the shop-page, they ask me for a login.

@hel : will you make an AT command manual available for the Clipper? These manuals usually have a few hundred pages. Nobody needs all of that. But once you leave very basic use-cases (and you can expect that your customers will do that sooner or later) you need the manual… and a lot of time to find the one page out of hundreds that solves your use-case ;-)

---

<div class="post-metadata">

**Author:** ![guru](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/guru/32/22_2.png) [@guru](https://forums.pimoroni.com/u/guru)\
**Post date:** [October 1, 2024, 4:27pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/15 "2024-10-01T16:27:15Z")

</div>

Software is catching up with hardware as usual, so Plasma 2350 setup are not smooth yet. We’re also a few pull requests ahead of the PPP support in MicroPython, which makes things extra complex for the moment :-)

We’ll get our ducks in a row over the next few days and have better examples and things for everything SP/CE.

The module does have plain 2.54mm pins if you wanna go old skool or attach it to an RPi ahead of the Mini HAT arriving.

---

<div class="post-metadata">

**Author:** ![4g\_module](https://avatars.discourse-cdn.com/v4/letter/4/bb73d2/32.png) [@4g\_module](https://forums.pimoroni.com/u/4g_module)\
**Post date:** [October 1, 2024, 4:53pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/16 "2024-10-01T16:53:31Z")

</div>

Can I control the board using C++?

Is it just a serial interface with AT commands on top?

---

<div class="post-metadata">

**Author:** ![guru](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/guru/32/22_2.png) [@guru](https://forums.pimoroni.com/u/guru)\
**Post date:** [October 1, 2024, 5:13pm UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/17 "2024-10-01T17:13:50Z")

</div>

If you check out the MicroPython module code you can see the PPP/AT commands that are happening under the hood: [pimoroni-pico-rp2350/micropython/modules\_py/lte.py at feature/can-haz-ppp-plz · pimoroni/pimoroni-pico-rp2350 · GitHub](https://github.com/pimoroni/pimoroni-pico-rp2350/blob/feature/can-haz-ppp-plz/micropython/modules_py/lte.py)

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 2, 2024, 7:24am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/18 "2024-10-02T07:24:33Z")

</div>

Thanks. I’ll hold off a a few days I reckon. Or if I am feeling strong/brave have a crack!

---

<div class="post-metadata">

**Author:** ![patmolloy](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@patmolloy](https://forums.pimoroni.com/u/patmolloy)\
**Post date:** [October 2, 2024, 10:37am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/19 "2024-10-02T10:37:55Z")

</div>

Ok, I am stuck now … I’ve got the Clipper connected to the Plasma 2350 via the SP/CE cable, I’ve traced out what is going where in terms of connections on the SP/CE connectors each end of the cable.

Clipper → Plasmon 2350  
3.7-6V → 5V  
VDDIO → 3v3  
TX → GP9  
Netlight → GP10  
RESET → GP11  
RX → GP8  
PWRKEY → GP7  
"- " → GND

In terms of the pin definitions in the script fragment below, what the that actual pin numbers I need?

DEFAULT\_PIN\_RST = 35  
DEFAULT\_PIN\_NETLIGHT = 34  
DEFAULT\_PIN\_RX = 33  
DEFAULT\_PIN\_TX = 32  
DEFAULT\_UART\_ID = 0

Sorry if this is an idiotic question!

---

<div class="post-metadata">

**Author:** ![guru](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/guru/32/22_2.png) [@guru](https://forums.pimoroni.com/u/guru)\
**Post date:** [October 2, 2024, 11:02am UTC](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847/20 "2024-10-02T11:02:44Z")

</div>

@patmolloy Here’s the fairly terrible snippet I’ve used to get online with the Plasma 2350 for now:

```auto
# Setting this to True will attempt to resume an existing connection
RESUME = False

PIN_TX = 8
PIN_RST = 11
PIN_NETLIGHT = 10
PIN_RX = 9
UART_ID = 1

plasmauart = UART(UART_ID, tx=Pin(PIN_TX, Pin.OUT), rx=Pin(PIN_RX, Pin.OUT))
plasmareset = Pin(PIN_RST, Pin.OUT)
plasmanetlightpin = Pin(PIN_NETLIGHT, Pin.OUT)

# Fix the eye-searing brightness of the onboard LED with PWM
class Netlight:
    def __init__ (self):
        self.pin = PWM(Pin(PIN_NETLIGHT, Pin.OUT), freq=1000)

    def value(self, value):
        self.pin.duty_u16(value * 2000)

con = lte.LTE(MOBILE_APN, uart=plasmauart, reset_pin=plasmareset, netlight_pin=plasmanetlightpin, netlight_led=Netlight(), skip_reset=RESUME)
con.start_ppp(connect=not RESUME)here

```

[Next page](https://forums.pimoroni.com/t/clipper-lte-4g-breakout/25847.md?page=2)
