# Connect NeoPixel to Pico Explorer

**URL:** <https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940>\
**Category:** Support\
**Created:** [July 31, 2022, 7:42pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940 "2022-07-31T19:42:40Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![cup](https://avatars.discourse-cdn.com/v4/letter/c/b5e925/32.png) [@cup](https://forums.pimoroni.com/u/cup)\
**Post date:** [July 31, 2022, 7:42pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/1 "2022-07-31T19:42:40Z")

</div>

I wish to control a neo pixel strip [Flexible RGB LED Strip (NeoPixel/WS2812/SK6812 compatible) - Pimoroni](https://shop.pimoroni.com/products/flexible-rgb-led-strip-neopixel-ws2812-sk6812-compatible?variant=30260032045139) from a Pico Explorer. There are a few things I am uncertain about.

1. Do I need any terminators for the neopixel strip or can I just leave the unconnected end open
2. If I add a strip connector [LED Strip Connector Cable - Pimoroni](https://shop.pimoroni.com/products/led-strip-connector-cable?variant=39299044868179), I’m assuming that I can just connect it to the GPIO on the PICO
3. Do I need anything else?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 31, 2022, 11:45pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/2 "2022-07-31T23:45:22Z")

</div>

I’d be careful which pin you use for power. I’d say your going to want to use VBUS, and draw power right from the USB power supply. The 3.3V out pin has a current limit.  
If you have a long strip with lots of LED’s, your going to want a beefy power supply to supply enough current to power them.

---

<div class="post-metadata">

**Author:** ![cup](https://avatars.discourse-cdn.com/v4/letter/c/b5e925/32.png) [@cup](https://forums.pimoroni.com/u/cup)\
**Post date:** [August 1, 2022, 6:08am UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/3 "2022-08-01T06:08:47Z")

</div>

Noted the point about power.

I’ve been groping round the internet - still can’t find any information about whether I need terminators. Maybe I’m using the wrong search words.

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [August 1, 2022, 8:21am UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/4 "2022-08-01T08:21:05Z")

</div>

This may help figure that out.  
[The Magic of NeoPixels | Adafruit NeoPixel Überguide | Adafruit Learning System](https://learn.adafruit.com/adafruit-neopixel-uberguide)

---

<div class="post-metadata">

**Author:** ![Tonygo2](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/tonygo2/32/7814_2.png) [@Tonygo2](https://forums.pimoroni.com/u/Tonygo2)\
**Post date:** [August 1, 2022, 1:34pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/5 "2022-08-01T13:34:57Z")

</div>

I do not use any terminators with Neopixels. I’ve got a 1 metre - 30 pixel strip and use an external power supply. Do not forget the join the GND on the strip to the GND on the Pico. Works very well.  
Have fun.

---

<div class="post-metadata">

**Author:** ![cup](https://avatars.discourse-cdn.com/v4/letter/c/b5e925/32.png) [@cup](https://forums.pimoroni.com/u/cup)\
**Post date:** [August 1, 2022, 7:33pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/6 "2022-08-01T19:33:27Z")

</div>

Thank you - I can now make up my shopping list.

---

<div class="post-metadata">

**Author:** ![Tonygo2](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/tonygo2/32/7814_2.png) [@Tonygo2](https://forums.pimoroni.com/u/Tonygo2)\
**Post date:** [February 3, 2023, 5:48pm UTC](https://forums.pimoroni.com/t/connect-neopixel-to-pico-explorer/19940/7 "2023-02-03T17:48:43Z")

</div>

Have you got it working? There is now a Neopixel library included within MicroPython which covers both Neopixels and Dotstars.

## NeoPixel and APA106 driver

[Quick reference for the RP2 — MicroPython latest documentation](https://docs.micropython.org/en/latest/rp2/quickref.html)
