# Connecting Enviro to R Pi4 **URL:** \ **Category:** Support\ **Created:** [November 14, 2020, 8:10pm UTC](https://forums.pimoroni.com/t/connecting-enviro-to-r-pi4/15335 "2020-11-14T20:10:49Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\ **Post date:** [November 20, 2020, 9:57am UTC](https://forums.pimoroni.com/t/connecting-enviro-to-r-pi4/15335/8 "2020-11-20T09:57:38Z")
Yeah, I did a lot of head scratching first time trying to use my LCD. Piece of cake now. > [@1.3 color tft LCD on btreakout garden pHat, SPI i2c](https://forums.pimoroni.com/t/1-3-color-tft-lcd-on-btreakout-garden-phat-spi-i2c/13033): > > I’m trying to get my 1.3" SPI Colour LCD (240x240) Breakout working with a Breakout Garden pHat The Breakout garden Installer didn’t find it, I had to do the manual install from here Running the scrolling-test.py example from idle3 got me a no module named st7789. Running sudo pip3 install st7789 fixed that but gets me a new error message that I think is because its plugged into the breakout garden? Traceback (most recent call last): File “/home/pi/Color LCD/scrolling-text.py”, … --- _[View the full topic](https://forums.pimoroni.com/t/connecting-enviro-to-r-pi4/15335)._