# Connecting Pico Display Pack with RFM69HCW Transceiver

**URL:** <https://forums.pimoroni.com/t/connecting-pico-display-pack-with-rfm69hcw-transceiver/25544>\
**Category:** Support\
**Created:** [September 23, 2024, 10:42pm UTC](https://forums.pimoroni.com/t/connecting-pico-display-pack-with-rfm69hcw-transceiver/25544 "2024-09-23T22:42:54Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [September 24, 2024, 3:43pm UTC](https://forums.pimoroni.com/t/connecting-pico-display-pack-with-rfm69hcw-transceiver/25544/4 "2024-09-24T15:43:10Z")

</div>

There is some info here: [Pico Display Pack 2.8 info?](https://forums.pimoroni.com/t/pico-display-pack-2-8-info/25273). According to this post the pins for the LEDs have moved.

If you look at the back of the Display-Pack 2.8, you can see “LED CUT” and some solder traces you can cut. So once you take out your knife you should be able to repurpose those GPIOs.

---

_[View the full topic](https://forums.pimoroni.com/t/connecting-pico-display-pack-with-rfm69hcw-transceiver/25544)._
