# DRV2605L setup with Adafruit Feather nRF52840 Express **URL:** \ **Category:** Support\ **Created:** [January 19, 2021, 11:31am UTC](https://forums.pimoroni.com/t/drv2605l-setup-with-adafruit-feather-nrf52840-express/15916 "2021-01-19T11:31:56Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![helou](https://avatars.discourse-cdn.com/v4/letter/h/ea5d25/32.png) [@helou](https://forums.pimoroni.com/u/helou)\ **Post date:** [January 19, 2021, 11:31am UTC](https://forums.pimoroni.com/t/drv2605l-setup-with-adafruit-feather-nrf52840-express/15916/1 "2021-01-19T11:31:56Z")
Hi there, I am starting with programming and electronics and need some help on setting up the Feather with a DRV2605L haptic sensor. The Feader is setup for circuitPython (I have manually included the libraries adafruit\_drv2605 and adafruit\_bus\_device, even though I am not sure if it’s needed once this is the Express version of the Feader) and connected the circuit. Using the command line, I have also installed the [Adafruit library](https://github.com/adafruit/Adafruit_CircuitPython_DRV2605) for the haptic sensor, as I wasn’t able to install the [Pimoroni](https://github.com/pimoroni/drv2605-python) one using the command line on Windows - an error comes up saying (…) " Running setup.py install for smbus … error ERROR: Command errored out with exit status 1:" (…) Would someone be able to help me with this??? ---
**Author:** ![helou](https://avatars.discourse-cdn.com/v4/letter/h/ea5d25/32.png) [@helou](https://forums.pimoroni.com/u/helou)\ **Post date:** [January 19, 2021, 12:24pm UTC](https://forums.pimoroni.com/t/drv2605l-setup-with-adafruit-feather-nrf52840-express/15916/2 "2021-01-19T12:24:41Z")
It is working now! it was just a question of adding two 10K resistors on the SLA and SCL ![circuit](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/2/2dbcef7c2f84646fdc975a6f6107748ec60395bb.jpeg)