# Enviro Display and Node-Red

**URL:** <https://forums.pimoroni.com/t/enviro-display-and-node-red/18891>\
**Category:** Support\
**Created:** [February 15, 2022, 2:00pm UTC](https://forums.pimoroni.com/t/enviro-display-and-node-red/18891 "2022-02-15T14:00:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![patofoto](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/patofoto/32/8521_2.png) [@patofoto](https://forums.pimoroni.com/u/patofoto)\
**Post date:** [February 15, 2022, 2:00pm UTC](https://forums.pimoroni.com/t/enviro-display-and-node-red/18891/1 "2022-02-15T14:00:47Z")

</div>

Have an Enviro on a Raspberry Pi Zero 2 W. Node-Red installed and publishing temperature via MQTT successfully. I would like to use the display to show the temperature and time but cannot figure out how to use the display. I see it needs the ST7735 library to use it via Python but want to drive it directly from Node-Red. Any info to point me in the right direction would be greatly appreciated. I am fairly green to coding in general and Java Script. Using Node-Red as a tool to get me thinking programmatically.

---

<div class="post-metadata">

**Author:** ![U.D](https://avatars.discourse-cdn.com/v4/letter/u/919ad9/32.png) [@U.D](https://forums.pimoroni.com/u/U.D)\
**Post date:** [May 30, 2023, 10:19am UTC](https://forums.pimoroni.com/t/enviro-display-and-node-red/18891/2 "2023-05-30T10:19:45Z")

</div>

Hi patofoto  
Did you solve this issue. I am looking too :)