# Enviro+ Featherwing with Airlift Featherwing

**URL:** https://forums.pimoroni.com/t/enviro-featherwing-with-airlift-featherwing/14032
**Category:** Support
**Created:** [May 26, 2020, 8:13am UTC](https://forums.pimoroni.com/t/enviro-featherwing-with-airlift-featherwing/14032 "2020-05-26T08:13:54Z")
**Posts on this page:** 1
**Showing post:** 10

<div class="post-metadata">

### Author: ![wildestpixel](https://avatars.discourse-cdn.com/v4/letter/w/35a633/32.png) [@wildestpixel](https://forums.pimoroni.com/u/wildestpixel)
#### Post date: [June 8, 2020, 6:53pm UTC](https://forums.pimoroni.com/t/enviro-featherwing-with-airlift-featherwing/14032/10 "2020-06-08T18:53:01Z")

</div>

Hi Stephen,

I ended up just using the PMS5003 by itself through this - [https://shop.pimoroni.com/products/particulate-matter-sensor-breakout](https://shop.pimoroni.com/products/particulate-matter-sensor-breakout) and using an ESP8266 with some arduino code to use the Thingspeak API instead of AdafruitIO.

My PMS5003 feed is currently on my site at [https://wildestpixel.co.uk/live-pms5003-feed](https://wildestpixel.co.uk/live-pms5003-feed) as a result.

I’ve got a BME280 on feather I’m going to airlift to AdafruitIO or Thingspeak in the next few days.

I was equally frustrated too as in consideration of the design, knowing its not going to be of use for IOT data with the defacto airlift, some workaround should have been looked at early on.

I’m also not sure how one is supposed to use for Luftdaten as advertised without jumping through many many hoops.

---

_[View the full topic](https://forums.pimoroni.com/t/enviro-featherwing-with-airlift-featherwing/14032)._