# Enviro Indoor and Adafruit.IO

**URL:** <https://forums.pimoroni.com/t/enviro-indoor-and-adafruit-io/22393>\
**Category:** Support\
**Created:** [June 23, 2023, 1:52pm UTC](https://forums.pimoroni.com/t/enviro-indoor-and-adafruit-io/22393 "2023-06-23T13:52:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GM8ARV](https://avatars.discourse-cdn.com/v4/letter/g/5daacb/32.png) [@GM8ARV](https://forums.pimoroni.com/u/GM8ARV)\
**Post date:** [June 23, 2023, 1:52pm UTC](https://forums.pimoroni.com/t/enviro-indoor-and-adafruit-io/22393/1 "2023-06-23T13:52:23Z")

</div>

I’m following the page here: [Getting Started with Enviro (Pico W Aboard)](https://learn.pimoroni.com/article/getting-started-with-enviro) but although everything appears to be OK, I’m not seeing my data in the Adafruit feed. I am connecting to the local Wi-Fi OK, and I’ve tried regenerating my key and inserting it in config.py, but no change. The log shows lines such as:

2023-06-23 13:20:49 [debug / 96576] \> performing startup  
2023-06-23 13:20:49 [debug / 94880] - hold vsys\_en high  
2023-06-23 13:20:49 [info / 126416] - wake reason: unknown  
2023-06-23 13:20:49 [debug / 124688] - turn on activity led  
2023-06-23 13:20:49 [debug / 120224] \> 91 blocks free out of 212  
2023-06-23 13:20:49 [info / 109968] \> 28 cache files need uploading  
2023-06-23 13:20:50 [info / 94704] \> connecting to wifi network ‘redacted’  
2023-06-23 13:20:55 [info / 109392] - ip address: 192.168.0.191  
2023-06-23 13:20:56 [error / 121744] ! failed to upload ‘2023-06-23 11:09:25.json’ (404 b’Not Found’) 2023-06-23 11:09:25.json  
2023-06-23 13:20:56 [error / 108016] ! failed to upload ‘2023-06-23 11:14:03.json’ (404 b’Not Found’) 2023-06-23 11:14:03.json  
2023-06-23 13:20:57 [error / 94640] ! failed to upload ‘2023-06-23 11:19:03.json’ (404 b’Not Found’) 2023-06-23 11:19:03.json  
2023-06-23 13:20:57 [error / 81264] ! failed to upload ‘2023-06-23 11:24:03.json’ (404 b’Not Found’) 2023-06-23 11:24:03.json

This with the factory firmware (enviro-v0.0.2.uf2). Firmware 0.0.9 (pimoroni-picow\_enviro-v1.19.10-micropython-v0.0.9.uf2) seemed to produce a permanent red LED. The json files appear to be present and correct:

Sample one in Uploads:  
{“luminance”: 217, “color\_temperature”: 5737, “pressure”: 998.93, “temperature”: 30.44, “humidity”: 31.69}

Readings:  
time,temperature,humidity,pressure,luminance,color\_temperature  
2023-06-23 11:09:25,30.61,32.35,999.8,333,5782  
.  
.  
.

Suggested next step, please?

---

<div class="post-metadata">

**Author:** ![Envioouser2023](https://avatars.discourse-cdn.com/v4/letter/e/ecccb3/32.png) [@Envioouser2023](https://forums.pimoroni.com/u/Envioouser2023)\
**Post date:** [June 23, 2023, 4:53pm UTC](https://forums.pimoroni.com/t/enviro-indoor-and-adafruit-io/22393/2 "2023-06-23T16:53:23Z")

</div>

I didn’t check the logs yet but all three of my enviro devices each on a different WiFi network in different countries stopped transmitting to IO.Adafruit last night also.