# Enviro+ lcd

**URL:** <https://forums.pimoroni.com/t/enviro-lcd/12416>\
**Category:** Support\
**Created:** [December 11, 2019, 3:51pm UTC](https://forums.pimoroni.com/t/enviro-lcd/12416 "2019-12-11T15:51:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![aelevthe](https://avatars.discourse-cdn.com/v4/letter/a/6bbea6/32.png) [@aelevthe](https://forums.pimoroni.com/u/aelevthe)\
**Post date:** [December 11, 2019, 3:51pm UTC](https://forums.pimoroni.com/t/enviro-lcd/12416/1 "2019-12-11T15:51:11Z")

</div>

I ve just got my enviro+ and connected to raspberry pi 3 but i think i got problem with lcd. In every python script i run from examples, including lcd.py i get the lcd on but nothing appears. Its only black with backlight led on. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Crowbot](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/crowbot/32/5888_2.png) [@Crowbot](https://forums.pimoroni.com/u/Crowbot)\
**Post date:** [December 11, 2019, 4:10pm UTC](https://forums.pimoroni.com/t/enviro-lcd/12416/2 "2019-12-11T16:10:56Z")

</div>

If the examples don’t run then it sounds like a bad display. If you feel confident you could check the connection of the display to the back of the board. (The brown flex cable) Otherwise I’d contact Pim for a replacement.

---

<div class="post-metadata">

**Author:** ![aelevthe](https://avatars.discourse-cdn.com/v4/letter/a/6bbea6/32.png) [@aelevthe](https://forums.pimoroni.com/u/aelevthe)\
**Post date:** [December 11, 2019, 4:41pm UTC](https://forums.pimoroni.com/t/enviro-lcd/12416/3 "2019-12-11T16:41:01Z")

</div>

I have checked it, disconnect-reconnect it also. I will contact Pim. Thank you very much.