# Enviro+ Pack with Pico 2 W

**URL:** <https://forums.pimoroni.com/t/enviro-pack-with-pico-2-w/27382>\
**Category:** Support\
**Created:** [February 25, 2025, 5:40pm UTC](https://forums.pimoroni.com/t/enviro-pack-with-pico-2-w/27382 "2025-02-25T17:40:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![robin1](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/robin1/32/11498_2.png) [@robin1](https://forums.pimoroni.com/u/robin1)\
**Post date:** [February 25, 2025, 5:40pm UTC](https://forums.pimoroni.com/t/enviro-pack-with-pico-2-w/27382/1 "2025-02-25T17:40:25Z")

</div>

Has anyone used the envrio+ pack with a pico 2 w? I’ve got one set up and the sensors are working but the A button is always being detected as pressed. I’ve tried the envrio+ pack with an original pico and it works as expected.

I’ve checked the continuity of the I/O pins and I don’t see any difference with the pico and pico 2

The store listing doesn’t mention the Pico 2 at all I’m wondering if it is not compatible. Can anyone confirm this?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [February 26, 2025, 1:47am UTC](https://forums.pimoroni.com/t/enviro-pack-with-pico-2-w/27382/2 "2025-02-26T01:47:23Z")

</div>

I get the same deal on Pico 2 / RP2350 with the older RP2040 code.

On my Pico Plus 2W I do this. It has a display Pack attached.

```auto
from machine import Pin

button_a = Pin(12, Pin.IN, Pin.PULL_UP)
button_b = Pin(13, Pin.IN, Pin.PULL_UP)
button_x = Pin(14, Pin.IN, Pin.PULL_UP)
button_y = Pin(15, Pin.IN, Pin.PULL_UP)

while True:
    
    if button_a.value() == 0:
        led.set_rgb(255, 0, 0)
    elif button_b.value() == 0:
        led.set_rgb(0, 155, 0)
    elif button_x.value() == 0:
        led.set_rgb(0, 0, 0)
    elif button_y.value() == 0:
        led.set_rgb(0, 0, 255)
    

```

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [February 26, 2025, 2:06am UTC](https://forums.pimoroni.com/t/enviro-pack-with-pico-2-w/27382/3 "2025-02-26T02:06:17Z")

</div>

[RP2350 GPIO internal pull problem and simplistic workaround - Support - Pimoroni Buccaneers](https://forums.pimoroni.com/t/rp2350-gpio-internal-pull-problem-and-simplistic-workaround/25443/11)