# Enviro Weather UF2 **URL:** \ **Category:** Support\ **Created:** [March 26, 2023, 8:21pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800 "2023-03-26T20:21:02Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![DS256](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ds256/32/9821_2.png) [@DS256](https://forums.pimoroni.com/u/DS256)\ **Post date:** [March 26, 2023, 8:21pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/1 "2023-03-26T20:21:02Z")
I ‘provisioned’ my Enviro Weather Pico but it failed to connect to the WiFi. I went to Troubleshooting and decided to get the latest Firmware. I copied pimoroni-picow\_enviro-v1.19.10-micropython-v0.0.9.UF2 and pasted it to the RPI-RP2 folder but after the copy is complete, nothing happens. I know with my other PICO W the folder closes and the PICO reboots but that didn’t happen here. Any suggestions? ---
**Author:** ![DS256](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ds256/32/9821_2.png) [@DS256](https://forums.pimoroni.com/u/DS256)\ **Post date:** [March 26, 2023, 8:34pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/2 "2023-03-26T20:34:07Z")
I pasted the latest Micropython pimoroni-picow\_enviro-v1.19.16-micropython.UF2. This closed the folder to close but no activity. can’t get it to go to provisioning. ---
**Author:** ![DS256](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ds256/32/9821_2.png) [@DS256](https://forums.pimoroni.com/u/DS256)\ **Post date:** [March 27, 2023, 8:42pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/3 "2023-03-27T20:42:12Z")
I was able to get a RPI PICO UF2 to install. Still no luck with Pimoroni UF2’s. Should I be addressing this problem somewhere else or trying to return this to the Canadian distributor I purchased it from? ---
**Author:** ![hel](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/hel/32/6075_2.png) [@hel](https://forums.pimoroni.com/u/hel)\ **Post date:** [March 28, 2023, 12:58pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/4 "2023-03-28T12:58:05Z")
Hmm, what computer are you using to copy the uf2 across? I know our production folks have had trouble copying these big prebuilt .uf2 files from the Raspberry Pi that we use for flashing/testing - could be worth trying with another machine? (or trying a manual installation as described here: [enviro/upgrading-firmware.md at main · pimoroni/enviro · GitHub](https://github.com/pimoroni/enviro/blob/main/documentation/upgrading-firmware.md#advanced-mode) ) ---
**Author:** ![DS256](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ds256/32/9821_2.png) [@DS256](https://forums.pimoroni.com/u/DS256)\ **Post date:** [March 28, 2023, 9:51pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/5 "2023-03-28T21:51:07Z")
Thanks for the tip @hel. I was trying to copy from a PI400. I then tried from a MAC and was able to get pimoroni-picow\_enviro-v1.19.10-micropython-v0.0.9.UF2 pasted and provisioned. One follow on is that I have the activity light on but also the warning light. I’ve re-provisioned but no change. I moved the Enviro weather from the MAC back to the PI400 Thonny doesn’t connect to it. rshell says there are no Micropython boards. pyboard says “failed to access /dev/ttyACM0” How can I get a the files ---
**Author:** ![DS256](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/ds256/32/9821_2.png) [@DS256](https://forums.pimoroni.com/u/DS256)\ **Post date:** [March 28, 2023, 10:00pm UTC](https://forums.pimoroni.com/t/enviro-weather-uf2/21800/6 "2023-03-28T22:00:30Z")
I shutdown and powered up the PI400 and was able to access the Enviro Weather board.