# EnviroPlus Assistance

**URL:** <https://forums.pimoroni.com/t/enviroplus-assistance/11595>\
**Category:** Support\
**Created:** [September 10, 2019, 12:21am UTC](https://forums.pimoroni.com/t/enviroplus-assistance/11595 "2019-09-10T00:21:33Z")\
**Posts on this page:** 4\
**Page:** 4

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [July 10, 2021, 6:29pm UTC](https://forums.pimoroni.com/t/enviroplus-assistance/11595/61 "2021-07-10T18:29:50Z")

</div>

Just a FYI post. I’m currently running Enviro and Enviro+ code on a Breakout Garden setup. And with the display(s) and sensors mounted on headers to proto zero boards. It’s one way to isolate your Pi from the sensors. I just put the Proto Zero’s or Breakout Garden Mini 's on a Mini Black Hat Hacker or pHat Stack. The Pi Zero with a 90 female header plugs in where the ribbon cable normally goes. There are lots of ways to stop the heat transfer from the Pi to the sensor.

 ![DSCF5251](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/8/8da5a32a931f77c6461901b545535b8698152083.jpeg)

 ![Front View](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/3/3471d6ae2ab71ed155213836005b53e7a6fdb366.jpeg)

---

<div class="post-metadata">

**Author:** ![ExperiMentor](https://avatars.discourse-cdn.com/v4/letter/e/f17d59/32.png) [@ExperiMentor](https://forums.pimoroni.com/u/ExperiMentor)\
**Post date:** [August 10, 2022, 4:55pm UTC](https://forums.pimoroni.com/t/enviroplus-assistance/11595/62 "2022-08-10T16:55:03Z")

</div>

Simple visible-to-the-world graphing is easily achieved via [io.adafruit.com](http://io.adafruit.com) (their free account allows up to 10 sensors - great as there are 9 sensors on an enviro+ with particle counts).

See my dashboard at [IO - Cortmalaw (adafruit.com)](https://io.adafruit.com/Cortmalaw/dashboards/cortmalaw) where I’ve added a Geiger counter as well

---

<div class="post-metadata">

**Author:** ![Geotek1](https://avatars.discourse-cdn.com/v4/letter/g/a698b9/32.png) [@Geotek1](https://forums.pimoroni.com/u/Geotek1)\
**Post date:** [September 23, 2022, 1:39pm UTC](https://forums.pimoroni.com/t/enviroplus-assistance/11595/63 "2022-09-23T13:39:45Z")

</div>

Greetings

I understand you were able to send Pimoroni enviro + data to Adafruit IO. Could you please share some info as to how you were able to do this. What program/s did you use to send data/ info to Adafruit IO  
Thanks in advance  
Tom

---

<div class="post-metadata">

**Author:** ![ExperiMentor](https://avatars.discourse-cdn.com/v4/letter/e/f17d59/32.png) [@ExperiMentor](https://forums.pimoroni.com/u/ExperiMentor)\
**Post date:** [September 24, 2022, 6:00pm UTC](https://forums.pimoroni.com/t/enviroplus-assistance/11595/64 "2022-09-24T18:00:54Z")

</div>

I started from this project by roscoe81, thenheavily modified it to suit my needs (it’s more complicated than I need). Adafruit outputs are part of it.

> **[GitHub - roscoe81/enviro-monitor: An environment monitor based on a Raspberry...](https://github.com/roscoe81/enviro-monitor/)**
>
> An environment monitor based on a Raspberry Pi Zero W, a Pimoroni Enviro+ and a Plantower air quality sensor to monitor, display and report on air particles, gases, temperature, humidity, noise and...

[Previous page](https://forums.pimoroni.com/t/enviroplus-assistance/11595.md?page=3)