# Galactic Unicorn can't reset

**URL:** <https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860>\
**Category:** Support\
**Created:** [December 1, 2022, 7:49pm UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860 "2022-12-01T19:49:00Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![placebo83](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/placebo83/32/6800_2.png) [@placebo83](https://forums.pimoroni.com/u/placebo83)\
**Post date:** [December 1, 2022, 7:49pm UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/1 "2022-12-01T19:49:00Z")

</div>

I’m tinkering a bit with my Galactic Unicorn, the last thing I did was saving the [rainbow.py](https://github.com/pimoroni/pimoroni-pico/blob/993609342eb3e1f72fa4076f444ecd00d09c005e/micropython/examples/galactic_unicorn/rainbow.py) as main.py which worked fine. After that I put it in bootloader mode and copied [pimoroni-picow\_galactic\_unicorn-v1.19.10-micropython.uf2](https://github.com/pimoroni/pimoroni-pico/releases/download/v1.19.10/pimoroni-picow_galactic_unicorn-v1.19.10-micropython.uf2) to it. Normally then I’m able to find it in Thonny, but not this time, even not after resetting it again and again, the only weird thing is that the rainbow example was still working. So I entered again bootloader mode and copied [this](https://www.raspberrypi.org/documentation/pico/getting-started/static/6f6f31460c258138bd33cc96ddd76b91/flash_nuke.uf2) special file from the getting started guide, and to be sure I installed micropython for the Galactic Unicorn via Thonny, as shown in the screenshot.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/c/cd599ef3026e38eda3c0c4594da77867b141850e.png)

This action led to the following prompt:

> Downloading from [https://github.com/pimoroni/pimoroni-pico/releases/download/v1.19.10/pimoroni-picow\_galactic\_unicorn-v1.19.10-micropython.uf2](https://github.com/pimoroni/pimoroni-pico/releases/download/v1.19.10/pimoroni-picow_galactic_unicorn-v1.19.10-micropython.uf2)  
> Writing to D:\pimoroni-picow\_galactic\_unicorn-v1.19.10-micropython.uf2  
> 100%  
> Waiting for the port…  
> Warning: Could not find port in 10 seconds
> 
> Done!

Aaand the rainbow example was stil there, working like a charm, but that’s not what I want.

Any idea how to solve this?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [December 2, 2022, 8:17am UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/2 "2022-12-02T08:17:29Z")

</div>

Did you try the “configure port manually” option in Thorny? In case it switched com port numbers on you.

---

<div class="post-metadata">

**Author:** ![placebo83](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/placebo83/32/6800_2.png) [@placebo83](https://forums.pimoroni.com/u/placebo83)\
**Post date:** [December 2, 2022, 9:42am UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/3 "2022-12-02T09:42:20Z")

</div>

Thanks for the tip, if you mean by configure port manually the option in the screenshot; I tried that, sadly nothing.

 ![image](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/e/e89f6785adbb058913d2091a079f35f4b185154e.png)

---

<div class="post-metadata">

**Author:** ![Tonygo2](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/tonygo2/32/7814_2.png) [@Tonygo2](https://forums.pimoroni.com/u/Tonygo2)\
**Post date:** [December 2, 2022, 10:35am UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/4 "2022-12-02T10:35:10Z")

</div>

I’d try the **flash\_nuke.uf2** to clear the memory and then re-install the correct uf2. Try clicking of the PORT menu and then click of the COM ? it finds.

You can find the instructions and the uf2 at the bottom of the page here:

> **[Raspberry Pi Documentation - Raspberry Pi Pico and Pico W](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html)**
>
> The official documentation for Raspberry Pi computers and microcontrollers

---

<div class="post-metadata">

**Author:** ![placebo83](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/placebo83/32/6800_2.png) [@placebo83](https://forums.pimoroni.com/u/placebo83)\
**Post date:** [December 2, 2022, 1:27pm UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/5 "2022-12-02T13:27:36Z")

</div>

I already did that, but with the Pimoroni instructions, but no success. Will try again with the instruction you posted this weekend :)

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [December 2, 2022, 1:34pm UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/6 "2022-12-02T13:34:44Z")

</div>

I just drag and drop from File Explorer. I put the PICO in boot mode, then drop the flash\_nuke.uf2 file to RPI-RP2. It will disappear then reappear. Then I do the same with the Pimoroni uf2 file.

---

<div class="post-metadata">

**Author:** ![placebo83](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/placebo83/32/6800_2.png) [@placebo83](https://forums.pimoroni.com/u/placebo83)\
**Post date:** [December 2, 2022, 10:24pm UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/7 "2022-12-02T22:24:22Z")

</div>

It works, thanks a lot!

---

<div class="post-metadata">

**Author:** ![Tonygo2](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/tonygo2/32/7814_2.png) [@Tonygo2](https://forums.pimoroni.com/u/Tonygo2)\
**Post date:** [December 3, 2022, 11:27am UTC](https://forums.pimoroni.com/t/galactic-unicorn-cant-reset/20860/8 "2022-12-03T11:27:57Z")

</div>

Glad you got it working. It’s a great board.
