# Geekworm P580 and NVME base

**URL:** <https://forums.pimoroni.com/t/geekworm-p580-and-nvme-base/24351>\
**Category:** Raspberry Pi\
**Created:** [March 5, 2024, 1:24am UTC](https://forums.pimoroni.com/t/geekworm-p580-and-nvme-base/24351 "2024-03-05T01:24:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alwi](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alwi/32/10643_2.png) [@alwi](https://forums.pimoroni.com/u/alwi)\
**Post date:** [March 5, 2024, 1:24am UTC](https://forums.pimoroni.com/t/geekworm-p580-and-nvme-base/24351/1 "2024-03-05T01:24:28Z")

</div>

Hi,  
Can anyone confirm if the NVME base will fit in the Geekworm P580 case (on the bottom as intended)?  
Thanks,  
Alan

---

<div class="post-metadata">

**Author:** ![Patrick37](https://avatars.discourse-cdn.com/v4/letter/p/c89c15/32.png) [@Patrick37](https://forums.pimoroni.com/u/Patrick37)\
**Post date:** [April 28, 2024, 5:37am UTC](https://forums.pimoroni.com/t/geekworm-p580-and-nvme-base/24351/3 "2024-04-28T05:37:37Z")

</div>

Hi  
I did it it’s possible but very difficult (half a day and you need M2.5 screws)  
Good luck, Patrick