# GFX Pack Qwiic/STEMMA QT

**URL:** <https://forums.pimoroni.com/t/gfx-pack-qwiic-stemma-qt/22905>\
**Category:** Support\
**Created:** [September 8, 2023, 9:46pm UTC](https://forums.pimoroni.com/t/gfx-pack-qwiic-stemma-qt/22905 "2023-09-08T21:46:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![writes\_on](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/writes_on/32/10003_2.png) [@writes\_on](https://forums.pimoroni.com/u/writes_on)\
**Post date:** [September 8, 2023, 9:46pm UTC](https://forums.pimoroni.com/t/gfx-pack-qwiic-stemma-qt/22905/1 "2023-09-08T21:46:53Z")

</div>

Hi,

I’ve bought a GFX Pack for the Raspberry Pi Pico and I see that it has a Qwiic/STEMMA QT interface on it, that is essentially an I2C system. Is it possible to run the GFX Pack from the Pico using the Qwiic/STEMMA QT connector? Or is it only to connect additional sensors?

I’m trying to connect a display remote (1, maybe 2 inches) from the Pico in a project box, which is why I’m asking this.

Thanks,  
Doug

---

<div class="post-metadata">

**Author:** ![fishgotnosole](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/fishgotnosole/32/7883_2.png) [@fishgotnosole](https://forums.pimoroni.com/u/fishgotnosole)\
**Post date:** [September 8, 2023, 10:41pm UTC](https://forums.pimoroni.com/t/gfx-pack-qwiic-stemma-qt/22905/2 "2023-09-08T22:41:56Z")

</div>

How do there,  
Interesting question.  
I’d hazard a guess that the answer would be no.  
Looking at the [schematic](https://cdn.shopify.com/s/files/1/0174/1800/files/GFX_pack_schematic.pdf?v=1668443908) for the pico gfx lcd it’s running the display over SPI.  
AFAIK, the STEMMA/QT is to attach additional sensors.

To attach the display away from the pico, jumper cables into the relevant pins of the gfx pack should work okay?