# GROW mini submersible pump without hat

**URL:** <https://forums.pimoroni.com/t/grow-mini-submersible-pump-without-hat/17759>\
**Category:** Support\
**Created:** [August 23, 2021, 11:42am UTC](https://forums.pimoroni.com/t/grow-mini-submersible-pump-without-hat/17759 "2021-08-23T11:42:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ben\_404](https://avatars.discourse-cdn.com/v4/letter/b/7ab992/32.png) [@ben\_404](https://forums.pimoroni.com/u/ben_404)\
**Post date:** [August 23, 2021, 11:42am UTC](https://forums.pimoroni.com/t/grow-mini-submersible-pump-without-hat/17759/1 "2021-08-23T11:42:12Z")

</div>

Hi, I have bought one of the GROW mini submersible pumps ([Mini Submersible Water Pump (Grow) – Pimoroni](https://shop.pimoroni.com/products/mini-pump)), although I want to use it with my own system, rather than using the GROW hat.  
Can anyone advise on how to connect it to, and control from a Raspberry pi GPIO. I presume the red wire is power, and the white wire data? I’m also guessing I will need a relay, will any standard relay work?  
Thanks in advance :)

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [August 23, 2021, 12:13pm UTC](https://forums.pimoroni.com/t/grow-mini-submersible-pump-without-hat/17759/2 "2021-08-23T12:13:11Z")

</div>

I would say Red is the + and white is the -. You will need something between it and the Pi’s GPIO. You can’t drive it from a GPIO pin, they only out put 3.3V and not near enough current to turn the relay on. Odds are it would damage the Pi’s GPIO Pin.  
An automation Hat mini would be one way to go.

> **[Automation HAT Mini – Pimoroni](https://shop.pimoroni.com/products/automation-hat-mini)**
>
> Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display.

The pump is motor driven so this may also be an option

> **[DRV8830 DC Motor Driver Breakout – Pimoroni](https://shop.pimoroni.com/products/drv8830-dc-motor-driver-breakout)**
>
> An H-bridge DC motor driver with configurable current limit (0.2 or 1A) and up to four different I2C addresses. Great for DIY robot builds.

Or fab something up on your own.

---

<div class="post-metadata">

**Author:** ![ben\_404](https://avatars.discourse-cdn.com/v4/letter/b/7ab992/32.png) [@ben\_404](https://forums.pimoroni.com/u/ben_404)\
**Post date:** [August 23, 2021, 12:46pm UTC](https://forums.pimoroni.com/t/grow-mini-submersible-pump-without-hat/17759/3 "2021-08-23T12:46:19Z")

</div>

Ah that’s amazing, thank you!
