# How-to: Picade 12" Screen + HAT + Single Power Source + On/Off Buttons!

**URL:** <https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922>\
**Category:** Picade\
**Created:** [February 2, 2017, 9:36pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922 "2017-02-02T21:36:43Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![jarrah](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jarrah](https://forums.pimoroni.com/u/jarrah)\
**Post date:** [February 2, 2017, 9:36pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/1 "2017-02-02T21:36:43Z")

</div>

Hi All,

I would like to share the additions I have made to my Picade with a 12" screen. Thanks must go to @Dyltone for the button and voltage conversion ideas, and to @jopamo for the 12" screen and driver board suggestions, all from this thread: [12.1 Inch Display Question](http://forums.pimoroni.com/t/12-1-inch-display-question/3262)

My modifications involve two power buttons, the new Picade HAT, and a single 12V power source. All links to where I bought the items are below as well.

The key features this setup offers is the ability to have a single power source with a master on/off button, and an additional button that utilises Picade HAT’s Pi on/off feature. Both buttons light up when on for a nice visual feedback. Also, my setup allows you to have physical volume up/down buttons (missing from the HAT), and the wiring of both speakers together. A full circuit diagram is below too.

Here are some pictures (yes, not the neatest of mods):

 ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/0/0436a90f910a32a8f73a46a95241a0482bdf3953.JPG)  
 ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/2/242b81690d711557fbbeb4ba18baeede4fbdd422.JPG)

Here is a video showing them in action:

> **[Picade HAT Custom Buttons](https://vimeo.com/202279121)**
>
> This is "Picade HAT Custom Buttons" by Jarrah on Vimeo, the home for high quality videos and the people who love them.

Shopping List (all items either shipped to or bought in the UK)

- 12" LCD screen - Samsung LTN121XL01-N03 - [http://www.displaysscreen.com/original-ltn121xl01n03-samsung-screen-121-1024×768-ltn121xl01n03-display-p-2767.html](http://www.displaysscreen.com/original-ltn121xl01n03-samsung-screen-121-1024%C3%97768-ltn121xl01n03-display-p-2767.html)
- Driver board for the 12" screen (make sure you tell them your LCD model number) [http://www.ebay.com/itm/151648143215](http://www.ebay.com/itm/151648143215)
- Picade HAT - [https://shop.pimoroni.com/products/picade-hat](https://shop.pimoroni.com/products/picade-hat)
- Latching 16mm Push Button Switch 12V - [http://www.ebay.co.uk/itm/281778954298](http://www.ebay.co.uk/itm/281778954298)
- Momentary 16mm Black Push Button Switch 12V - [http://www.ebay.co.uk/itm/261439786735](http://www.ebay.co.uk/itm/261439786735)
- 1.5M DC Power Cable/Lead -5.5mm x 2.5mm- Male Plug to Bare Ends (you won’t need 1.5m, but the extra wire was used to solder everything together) - [http://www.ebay.co.uk/itm/371610088443](http://www.ebay.co.uk/itm/371610088443)
- 3A/15W Power Adapter 12V to 5V MICRO USB Cable Connector (handy to have micro USB as output) - [https://www.amazon.co.uk/gp/product/B015B5XZYQ](https://www.amazon.co.uk/gp/product/B015B5XZYQ)
- Genuine CWT 12V 5A, 60W AC adapter - [https://www.amazon.co.uk/gp/product/B004HCCVLI](https://www.amazon.co.uk/gp/product/B004HCCVLI)
- 5 x 2.5mm x 5.5mm Round Panel Chasis Mount Female Socket DC Connector (to be honest, these aren’t long enough for the fastening nut to hold it in place, so had to superglue it in) - [https://www.amazon.co.uk/gp/product/B00WZ8210C](https://www.amazon.co.uk/gp/product/B00WZ8210C)

Circuit diagram:

 ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/8/88dac2d19f05e34f49e22f9a247cf0bc6e206b60.JPG)

Hope this helps you have fun with your Picade too!

---

<div class="post-metadata">

**Author:** ![Dyltone](https://avatars.discourse-cdn.com/v4/letter/d/65b543/32.png) [@Dyltone](https://forums.pimoroni.com/u/Dyltone)\
**Post date:** [February 4, 2017, 4:16pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/2 "2017-02-04T16:16:52Z")

</div>

Great job! Very well executed.

Unfortunately, I can’t take credit for designing my build… I copied @Paulcheffus post and then asked him a 1000 questions. He’s the real electrical genius and I want everyone to know.  
I can only take credit for the joystick/button/lighting upgrades as those were my ideas.

May I ask a question… are you happy with the design of two types of switches rather than using a 3rd party power solution (atxraspi, powerblock, etc) and having a single power button?

---

<div class="post-metadata">

**Author:** ![jarrah](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jarrah](https://forums.pimoroni.com/u/jarrah)\
**Post date:** [February 5, 2017, 5:51pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/3 "2017-02-05T17:51:50Z")

</div>

@Dyltone yes I know what you mean with the switches, but as I have the Picade HAT I had to use the two. This is because the HAT doesn’t automatically turn on unless you press the power button, so I’d have needed a 2nd switch anyway.

---

<div class="post-metadata">

**Author:** ![Dyltone](https://avatars.discourse-cdn.com/v4/letter/d/65b543/32.png) [@Dyltone](https://forums.pimoroni.com/u/Dyltone)\
**Post date:** [February 5, 2017, 6:18pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/4 "2017-02-05T18:18:47Z")

</div>

Makes sense.

Just thinking out loud, and not sure this would work. I’m would think you could have used the LED leads from a single power button to complete the start up circuit on the HAT power button or something similar.

Either way, beautiful work and thanks for sharing. I love this little cade.

---

<div class="post-metadata">

**Author:** ![AeroMaxx](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@AeroMaxx](https://forums.pimoroni.com/u/AeroMaxx)\
**Post date:** [February 13, 2017, 9:53am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/5 "2017-02-13T09:53:11Z")

</div>

How did you make the holes for the power buttons?

Also does the 2.5mm x 5.5mm button need to have a rating of 12VDC 3A?

Would a button that has a rating of 12VDC 1A be fine?

> **[2.5mm x 5.5mm Round Panel Mount Female Socket DC Connector Jack Plug | eBay](http://www.ebay.co.uk/itm/281754926314)**
>
> 2.5mm x 5.5mm Round Panel Mount Female Socket DC Connector Jack Plug. | eBay!

---

<div class="post-metadata">

**Author:** ![Paulcheffus](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@Paulcheffus](https://forums.pimoroni.com/u/Paulcheffus)\
**Post date:** [February 13, 2017, 5:26pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/6 "2017-02-13T17:26:53Z")

</div>

Hi

Personally I wouldn’t use that socket as the rating is not high enough. The socket I used for mine was this one

> **[Switchcraft 722A 2.1mm Panel Mount Power Socket](https://www.rapidonline.com/switchcraft-722a-2-1mm-panel-mount-power-socket-20-0878)**
>
> Switchcraft - 722A - Switchcraft 722A 2.1mm Panel Mount Power Socket - Professional grade panel mounting 2.1mm DC power socket, suitable for use with

2.5mm version also available

> **[Switchcraft 712A 2.5mm Panel Mount Power Socket](https://www.rapidonline.com/switchcraft-712a-2-5mm-panel-mount-power-socket-20-0880)**
>
> Switchcraft - 712A - Switchcraft 712A 2.5mm Panel Mount Power Socket - Professional grade panel mounting 2.5mm DC power socket, suitable for use with

Which one you require will depend on the size of the plug on the PSU you are using.

The rating of the switch can be quite low as it doesn’t actually switch the full load of the PSU as this is taken care of by the unit you use such as the ATX Raspi / Powerblock or Picade HAT.

Cheers

Paul

---

<div class="post-metadata">

**Author:** ![AeroMaxx](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@AeroMaxx](https://forums.pimoroni.com/u/AeroMaxx)\
**Post date:** [February 13, 2017, 6:46pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/7 "2017-02-13T18:46:48Z")

</div>

That one says it works with panels upto 3.1mm thickness is that enough to screw it to the panel?

Edit: Have checked and the panels seem to be approx 5mm thickness.

I’ll keep looking, there must be some sockets available somewhere that have a rating of 12vDC 3A, and can do 5mm thickness, as the 1A ones exists, so based on that alone others must also surely.

---

<div class="post-metadata">

**Author:** ![jarrah](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jarrah](https://forums.pimoroni.com/u/jarrah)\
**Post date:** [February 13, 2017, 10:09pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/8 "2017-02-13T22:09:36Z")

</div>

@Dyltone It’s a good thought suggesting the LED leads, but I don’t think the light terminals are linked to the switch because I can light up the LED whether the switch is on or off.

@Paulcheffus I didn’t think to look at the rating of my power socket, so thanks for the tip! The version I used didn’t show a rating so may find an alternative just in case.

@AeroMaxx I used a 16mm hole drill like this one:

> **[Erbauer Flat Wood Bit 16mm](https://www.screwfix.com/p/erbauer-flat-wood-bit-16mm/97262)**
>
> Order online at Screwfix.com. ¼

---

<div class="post-metadata">

**Author:** ![AeroMaxx](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@AeroMaxx](https://forums.pimoroni.com/u/AeroMaxx)\
**Post date:** [February 14, 2017, 7:29am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/9 "2017-02-14T07:29:45Z")

</div>

@jarrah thanks for the tip on the tool, will need to get one of those!

Also if you find a better power socket please let me know ill keep looking also, and do the same!

---

<div class="post-metadata">

**Author:** ![Paulcheffus](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@Paulcheffus](https://forums.pimoroni.com/u/Paulcheffus)\
**Post date:** [February 14, 2017, 5:04pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/10 "2017-02-14T17:04:16Z")

</div>

Hi

You could do what I did and recess the socket from the inside using the flat drill bit as shown. Just be careful that you don’t drill all the way through.

You might be able to make it out from this photo  
[http://forums.pimoroni.com/t/what-improvement-could-be-done-on-the-picade/813/18?u=paulcheffus](http://forums.pimoroni.com/t/what-improvement-could-be-done-on-the-picade/813/18?u=paulcheffus)

Cheers

Paul

---

<div class="post-metadata">

**Author:** ![AeroMaxx](https://avatars.discourse-cdn.com/v4/letter/a/4af34b/32.png) [@AeroMaxx](https://forums.pimoroni.com/u/AeroMaxx)\
**Post date:** [February 15, 2017, 10:23pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/11 "2017-02-15T22:23:33Z")

</div>

Thanks for that I did wonder why there was a white bit there, now I know!

I think I have 2 choices basically do what you have done.

or I noticed that the socket you use had the thread at the front, not behind, so I thought I could just make a slightly small hole in the panel and screw the thread into the hole, I shouldn’t then need the nut on the other side to hold it in I am hoping at least.

---

<div class="post-metadata">

**Author:** ![jarrah](https://avatars.discourse-cdn.com/v4/letter/j/e9c0ed/32.png) [@jarrah](https://forums.pimoroni.com/u/jarrah)\
**Post date:** [February 16, 2017, 3:07pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/12 "2017-02-16T15:07:33Z")

</div>

Or a third option is to superglue the connector into place (probably not wise but it was my only option at the time). :)

---

<div class="post-metadata">

**Author:** ![Paulcheffus](https://avatars.discourse-cdn.com/v4/letter/p/977dab/32.png) [@Paulcheffus](https://forums.pimoroni.com/u/Paulcheffus)\
**Post date:** [February 16, 2017, 8:39pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/13 "2017-02-16T20:39:13Z")

</div>

Hi

Yes that should work and was something I considered until I had the idea of rebating the inside.

Cheers

Paul

---

<div class="post-metadata">

**Author:** ![Luis](https://avatars.discourse-cdn.com/v4/letter/l/3e96dc/32.png) [@Luis](https://forums.pimoroni.com/u/Luis)\
**Post date:** [February 21, 2017, 3:46pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/14 "2017-02-21T15:46:55Z")

</div>

This is my setup so far. Single power source with ATXRaspi. I still need to secure the Pi and do some cable management but overall I am very happy with the results.  
Thanks to Dyltone and Paulcheffus for answering all my silly questions and findon for the artwork.

 ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/2/2d76ec4fad1f9f5247fe04f33e8e78da657e0738.JPG) ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/e/ecf9e32134555a912a1cb9d3a15b543ff745d4e3.JPG) ![](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/8/81068638887ceb219ace3f3796c8758227ed01a0.JPG)

---

<div class="post-metadata">

**Author:** ![fcalcada](https://avatars.discourse-cdn.com/v4/letter/f/f9ae1b/32.png) [@fcalcada](https://forums.pimoroni.com/u/fcalcada)\
**Post date:** [May 2, 2017, 12:51pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/15 "2017-05-02T12:51:10Z")

</div>

> [@Luis](#):
>
> This is my setup so far. Single power source with ATXRaspi. I still need to secure the Pi and do some cable management but overall I am very happy with the results.

Really impressed with this setup Luis. Actually have a few questions on this:  
Would you be able to sketch out the connections? So I am sure that this is what I am seeing:

1. your 12v Power source is fed into the cab, branched out to direct 12v power to lcd driver board and 12v in to the 12vto5V CPT.
2. from 5V out from CVP goes to ATXRaspi and from there you power RaspPi via GPIO and not via micro usb.  
Am I correct?

Post-Edit: After seeing ATXRaspi intro video I realized that you must still power PI from micro USB, GPIO are used to send commands do Pi to enable boot/reboot/shutdown. #newbie

---

<div class="post-metadata">

**Author:** ![Luis](https://avatars.discourse-cdn.com/v4/letter/l/3e96dc/32.png) [@Luis](https://forums.pimoroni.com/u/Luis)\
**Post date:** [May 2, 2017, 7:03pm UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/16 "2017-05-02T19:03:39Z")

</div>

1. Correct
2. The CPT that I got has a micro usb output that gets connected to the ATXRaspi 5v input and from there it gets connected to the Pie via USB A to Micro USB cable (i got this cable from the ATXRaspi website).

---

<div class="post-metadata">

**Author:** ![fcalcada](https://avatars.discourse-cdn.com/v4/letter/f/f9ae1b/32.png) [@fcalcada](https://forums.pimoroni.com/u/fcalcada)\
**Post date:** [May 4, 2017, 10:12am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/17 "2017-05-04T10:12:44Z")

</div>

Brilliant. Thanks again Luis! :D

---

<div class="post-metadata">

**Author:** ![radiokid](https://avatars.discourse-cdn.com/v4/letter/r/a9a28c/32.png) [@radiokid](https://forums.pimoroni.com/u/radiokid)\
**Post date:** [May 18, 2017, 10:16am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/18 "2017-05-18T10:16:23Z")

</div>

Hi Luis. Is the power switch you used momentary or latching. I bought a latching one that stays in when you press it. Will a switch like this work ok?

This is what I bought [Blue Angel Eye Latching](http://www.ebay.co.uk/itm/281778954298?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)

---

<div class="post-metadata">

**Author:** ![fcalcada](https://avatars.discourse-cdn.com/v4/letter/f/f9ae1b/32.png) [@fcalcada](https://forums.pimoroni.com/u/fcalcada)\
**Post date:** [May 18, 2017, 11:06am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/19 "2017-05-18T11:06:52Z")

</div>

Hey Radiokid

If you are using ATXRaspi, it should work with a latching switch  
[https://lowpowerlab.com/guide/atxraspi/assembly-install/](https://lowpowerlab.com/guide/atxraspi/assembly-install/)

Although I think momentary setup is much simpler.

@Luis  
already have the 12v -5V power converter AND the ATX Raspi :)  
now only waiting for the LCD Driver board to test assemble everything  
and hope that Picade BYO Screen becomes available soon ^\_^

---

<div class="post-metadata">

**Author:** ![radiokid](https://avatars.discourse-cdn.com/v4/letter/r/a9a28c/32.png) [@radiokid](https://forums.pimoroni.com/u/radiokid)\
**Post date:** [May 18, 2017, 11:38am UTC](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922/20 "2017-05-18T11:38:17Z")

</div>

I’ve actually bought an [OnOffShim](https://shop.pimoroni.com/products/onoff-shim) as the ATXRaspi isn’t readily available here in the UK, and all I need it for is turning on and safely shutting down. Maybe I’ll just get a momentary instead. In fact I’ve found the exact same switch but a momentary one, so that’s good.

[Next page](https://forums.pimoroni.com/t/how-to-picade-12-screen-hat-single-power-source-on-off-buttons/3922.md?page=2)
