# Hyperpixel 2.1 Round with Raspberry Pi 5

**URL:** <https://forums.pimoroni.com/t/hyperpixel-2-1-round-with-raspberry-pi-5/26376>\
**Category:** Support\
**Created:** [October 19, 2024, 9:24pm UTC](https://forums.pimoroni.com/t/hyperpixel-2-1-round-with-raspberry-pi-5/26376 "2024-10-19T21:24:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![scotty](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@scotty](https://forums.pimoroni.com/u/scotty)\
**Post date:** [October 19, 2024, 9:24pm UTC](https://forums.pimoroni.com/t/hyperpixel-2-1-round-with-raspberry-pi-5/26376/1 "2024-10-19T21:24:28Z")

</div>

Hi, was anyone able to install Touch Driver on Raspberry Pi 5? The display works, but I can’t make the touch work. Thanks for help

```auto

Traceback (most recent call last):
  File "/home/scotty/cuteMoonclock/crypto.py", line 67, in <module>
    touch = Touch(bus=11, i2c_addr=0x15, interrupt_pin=27)
            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/dist-packages/hyperpixel2r/ __init__.py", line 18, in __init__
    GPIO.setup(self._interrupt_pin, GPIO.IN, pull_up_down=GPIO.PUD_UP)
RuntimeError: Cannot determine SOC peripheral base address

```