# Hyperpixel 4.0: Black screen

**URL:** <https://forums.pimoroni.com/t/hyperpixel-4-0-black-screen/10035>\
**Category:** Support\
**Created:** [March 2, 2019, 5:03pm UTC](https://forums.pimoroni.com/t/hyperpixel-4-0-black-screen/10035 "2019-03-02T17:03:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guardian](https://avatars.discourse-cdn.com/v4/letter/g/49beb7/32.png) [@Guardian](https://forums.pimoroni.com/u/Guardian)\
**Post date:** [March 2, 2019, 5:03pm UTC](https://forums.pimoroni.com/t/hyperpixel-4-0-black-screen/10035/1 "2019-03-02T17:03:41Z")

</div>

So I bought a Hyperpixel 4.0 touch display a while ago, but I have not succeeded yet in getting it up and running with Rpi Zero W.

My problem is:

- My Rpi Zero W works perfectly fine before the one-line installation.
- After the installation is complete, the system reboots but both the HDMI and Hyperpixel screen stay blank.
- In SSH, I shut down the Rpi. After removing the installation manually, the Rpi works fine again.
- In SSH, I tried to run `hyperpixel4-init`, but it didn’t do anything apparantly.
- The hyperpixel screen stays blank with the backlight LEDs glowing, so I assume the hardware is fine.

Can anybody please help me? I do not know what else I can do to try to fix this.

---

<div class="post-metadata">

**Author:** ![Matt](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/matt/32/1006_2.png) [@Matt](https://forums.pimoroni.com/u/Matt)\
**Post date:** [March 6, 2019, 3:44pm UTC](https://forums.pimoroni.com/t/hyperpixel-4-0-black-screen/10035/2 "2019-03-06T15:44:16Z")

</div>

Sorry to hear that, how long did you leave it running with the black screen? It can take a minute or two for anything to show up. Also what kind of headers do you have installed on the Zero?

---

<div class="post-metadata">

**Author:** ![Guardian](https://avatars.discourse-cdn.com/v4/letter/g/49beb7/32.png) [@Guardian](https://forums.pimoroni.com/u/Guardian)\
**Post date:** [March 10, 2019, 10:07am UTC](https://forums.pimoroni.com/t/hyperpixel-4-0-black-screen/10035/3 "2019-03-10T10:07:21Z")

</div>

I managed to fix the issue!

So I might be a kind of newbie to all the Rpi’s stuff, and it turned out that my headers weren’t solded good enough. I feel so stupid right now…

Thanks for your help and time anyway Matt, I really appreciate this community so far!
