# Hyperpixel Round display

**URL:** <https://forums.pimoroni.com/t/hyperpixel-round-display/20250>\
**Category:** Support\
**Created:** [September 10, 2022, 2:34pm UTC](https://forums.pimoroni.com/t/hyperpixel-round-display/20250 "2022-09-10T14:34:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![uhi1000](https://avatars.discourse-cdn.com/v4/letter/u/91b2a8/32.png) [@uhi1000](https://forums.pimoroni.com/u/uhi1000)\
**Post date:** [September 10, 2022, 2:34pm UTC](https://forums.pimoroni.com/t/hyperpixel-round-display/20250/1 "2022-09-10T14:34:20Z")

</div>

Hello,  
Which gpios on the Rasberry Pi are not connected to the hyperpixel display???  
or which ones are connected??

best regard

---

<div class="post-metadata">

**Author:** ![Caperjack1953](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/caperjack1953/32/7923_2.png) [@Caperjack1953](https://forums.pimoroni.com/u/Caperjack1953)\
**Post date:** [September 10, 2022, 4:53pm UTC](https://forums.pimoroni.com/t/hyperpixel-round-display/20250/2 "2022-09-10T16:53:37Z")

</div>

this should help, [https://cdn.shopify.com/s/files/1/0174/1800/files/Hyperpixel\_Round\_PIM579\_Pinout.png?v=1658310805](https://cdn.shopify.com/s/files/1/0174/1800/files/Hyperpixel_Round_PIM579_Pinout.png?v=1658310805)  
everything is on the hyperpixel shop page, just scroll down the page .[HyperPixel 2.1 Round - Hi-Res Display for Raspberry Pi - Pimoroni](https://shop.pimoroni.com/products/hyperpixel-round?variant=39381081882707)

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [September 10, 2022, 5:50pm UTC](https://forums.pimoroni.com/t/hyperpixel-round-display/20250/3 "2022-09-10T17:50:39Z")

</div>

The short answer is, none of them, it uses all of the GPIO pins.  
This is for the square version but interface wise, as far as I know, it uses the same pins.  
[Hyperpixel4 at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/hyperpixel4)

If its none touch you “might” be able to snag 1 or 2 pins?
