# HyperPixel with Raspberry Pi OS Lite?

**URL:** <https://forums.pimoroni.com/t/hyperpixel-with-raspberry-pi-os-lite/24458>\
**Category:** Electronics\
**Created:** [March 16, 2024, 8:05pm UTC](https://forums.pimoroni.com/t/hyperpixel-with-raspberry-pi-os-lite/24458 "2024-03-16T20:05:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sfsdfd3](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@sfsdfd3](https://forums.pimoroni.com/u/sfsdfd3)\
**Post date:** [March 16, 2024, 8:05pm UTC](https://forums.pimoroni.com/t/hyperpixel-with-raspberry-pi-os-lite/24458/1 "2024-03-16T20:05:45Z")

</div>

I’m working on some projects using a Raspberry Pi Zero 2 W and a touchscreen.

Because the device is only going to run a single pygame app, I’d really like to configure it to run in kiosk mode - i.e., Raspberry Pi OS Lite without any kind of X11 environment. I have gotten this configuration working with the official Raspberry Pi 7" touchscreen and a Raspberry Pi 3/4, but I’d like to use a similar environment with a Zero 2 W and a smaller touchscreen. I’ve tried a variety of Waveshare screens and have completely given up - their driver support is terrible and I cannot find any configuration of pygame / SDL2 that works with fbcon, directfb, etc.

Hence my questions: Does the Hyperpixel work in Raspberry Pi OS Lite without X11? Anything I need to know to make this work? Thanks in advance.

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [March 18, 2024, 2:41pm UTC](https://forums.pimoroni.com/t/hyperpixel-with-raspberry-pi-os-lite/24458/2 "2024-03-18T14:41:26Z")

</div>

I managed to make it work but it is already some time and I cannot find the specific code I used (it was a Pi Zero 2W together with the 2.1 round HyperPixel).

You can find some information on running pygame without X11 here: [GitHub - bablokb/pygame-fbgui: A GUI-Toolkit based on pygame targeted at small framebuffer-displays](https://github.com/bablokb/pygame-fbgui). Some of the information is not relevant for HyperPixels, since they already have their own touch-driver. But you will find some examples of starting a pygame-program from a systemd-service automatically, so you have your app up and running without anything else attached to your system.
