# I want to run 0.96LCD on Raspberry Pi Pico, but is it not possible in C?

**URL:** <https://forums.pimoroni.com/t/i-want-to-run-0-96lcd-on-raspberry-pi-pico-but-is-it-not-possible-in-c/22934>\
**Category:** Support\
**Created:** [September 14, 2023, 12:18pm UTC](https://forums.pimoroni.com/t/i-want-to-run-0-96lcd-on-raspberry-pi-pico-but-is-it-not-possible-in-c/22934 "2023-09-14T12:18:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![IZN](https://avatars.discourse-cdn.com/v4/letter/i/e19adc/32.png) [@IZN](https://forums.pimoroni.com/u/IZN)\
**Post date:** [September 14, 2023, 12:18pm UTC](https://forums.pimoroni.com/t/i-want-to-run-0-96lcd-on-raspberry-pi-pico-but-is-it-not-possible-in-c/22934/1 "2023-09-14T12:18:51Z")

</div>

nice to meet you.  
I would like to connect a 0.96LCD to Raspberry Pi Pico and make it work.  
However, I can’t find any C sample code.  
(I’ve seen C++ and Python, but I want to run it in C.)

1.Does anyone know any sample code to run it in C?  
2. I can’t find the reset pin, is it ok to set it to -1?

I included the following library and ran the sample, but there was no reaction.  
#include \<Adafruit\_GFX.h\>  
#include \<Adafruit\_ST7735.h\>

I can’t find the reset pin, is this setting ok to set it to -1?  
#define RESET -1  
#define DC 8 // D9 LCD\_DC  
#define CS 9 // D10 LCD\_CS  
#define TFT\_SDA 7 // D11 LCD\_SDA (MOSI)  
#define TFT\_SCL 6 // D13 LCD\_SCL (SCK)

---

<div class="post-metadata">

**Author:** ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)\
**Post date:** [September 14, 2023, 1:09pm UTC](https://forums.pimoroni.com/t/i-want-to-run-0-96lcd-on-raspberry-pi-pico-but-is-it-not-possible-in-c/22934/2 "2023-09-14T13:09:15Z")

</div>

I have a C++ project for that: [GitHub - bablokb/pico-st7735: Pico display library for the ST7735](https://github.com/bablokb/pico-st7735) and [GitHub - bablokb/pico-st7735-demo: Demo/Test program for repository pico-st7735](https://github.com/bablokb/pico-st7735-demo)

---

<div class="post-metadata">

**Author:** ![IZN](https://avatars.discourse-cdn.com/v4/letter/i/e19adc/32.png) [@IZN](https://forums.pimoroni.com/u/IZN)\
**Post date:** [September 21, 2023, 12:56pm UTC](https://forums.pimoroni.com/t/i-want-to-run-0-96lcd-on-raspberry-pi-pico-but-is-it-not-possible-in-c/22934/3 "2023-09-21T12:56:24Z")

</div>

thank you! I’ll check it out.