# Inventor Hat GPIO

**URL:** <https://forums.pimoroni.com/t/inventor-hat-gpio/24117>\
**Category:** Support\
**Created:** [February 6, 2024, 9:29pm UTC](https://forums.pimoroni.com/t/inventor-hat-gpio/24117 "2024-02-06T21:29:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![doubleb](https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/32.png) [@doubleb](https://forums.pimoroni.com/u/doubleb)\
**Post date:** [February 6, 2024, 9:29pm UTC](https://forums.pimoroni.com/t/inventor-hat-gpio/24117/1 "2024-02-06T21:29:51Z")

</div>

Hi Thanks for your help,

How does the Inventor Hat GPIOs map to the GPIOs on the Raspberry pi. I have a python library that uses from gpiozero.pins.pigpio import PiGPIOFactory to access the gpio on the pi. Would this work work with the Inventor hat?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [February 6, 2024, 9:44pm UTC](https://forums.pimoroni.com/t/inventor-hat-gpio/24117/2 "2024-02-06T21:44:16Z")

</div>

Inventor Hat Mini?  
If so the pinout is here.  
[Inventor HAT Mini at Raspberry Pi GPIO Pinout](https://pinout.xyz/pinout/inventor_hat_mini)  
The Python libraries etc are here.  
[pimoroni/inventorhatmini-python (github.com)](https://github.com/pimoroni/inventorhatmini-python)