# Iventors hat mini Dupont DC motor connector

**URL:** https://forums.pimoroni.com/t/iventors-hat-mini-dupont-dc-motor-connector/22860
**Category:** Support
**Created:** [September 2, 2023, 6:58am UTC](https://forums.pimoroni.com/t/iventors-hat-mini-dupont-dc-motor-connector/22860 "2023-09-02T06:58:01Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![CrowlerBot](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/crowlerbot/32/10068_2.png) [@CrowlerBot](https://forums.pimoroni.com/u/CrowlerBot)
#### Post date: [September 2, 2023, 6:58am UTC](https://forums.pimoroni.com/t/iventors-hat-mini-dupont-dc-motor-connector/22860/1 "2023-09-02T06:58:02Z")

</div>

Hello,  
I bought the inventors hat mini to drive a servo + 2-pin DC motor without encoder.

I have been squinting at this board for half an hour now, trying to find the  
[\* Alternate socket connector for attaching 2 standard (2-pin) motors](https://www.adafruit.com/product/5736)

![image](https://us1.discourse-cdn.com/flex016/uploads/pimoroni/original/2X/4/4751b36ab5ec2f4aba5a64758c9fa03353e99d0f.png)

Can someone tell me how to connect my motor or recommend a good eyedoctor?

Best Regards

---

<div class="post-metadata">

### Author: ![bablokb](https://avatars.discourse-cdn.com/v4/letter/b/ee59a6/32.png) [@bablokb](https://forums.pimoroni.com/u/bablokb)
#### Post date: [September 2, 2023, 7:03am UTC](https://forums.pimoroni.com/t/iventors-hat-mini-dupont-dc-motor-connector/22860/2 "2023-09-02T07:03:57Z")

</div>

The connector is on the bottom of the board, just below the normal A/B connectors. This is a female socket, so you need wires with pins.