# Layer 3 on Pibow Ninja

**URL:** <https://forums.pimoroni.com/t/layer-3-on-pibow-ninja/420>\
**Category:** Support\
**Created:** [February 16, 2015, 3:29am UTC](https://forums.pimoroni.com/t/layer-3-on-pibow-ninja/420 "2015-02-16T03:29:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![paul\_is\_orange](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/paul_is_orange/32/143_2.png) [@paul\_is\_orange](https://forums.pimoroni.com/u/paul_is_orange)\
**Post date:** [February 16, 2015, 3:29am UTC](https://forums.pimoroni.com/t/layer-3-on-pibow-ninja/420/1 "2015-02-16T03:29:26Z")

</div>

\*“We’ve redesigned Pibow to be compatible with both the Raspberry Pi 2 and B+. Due to changes in the layout of the power circuitry on the Raspberry Pi 2 layer 3 has had to be revised - older Pibows (one’s with a B+ label) will not work with Raspberry Pi 2!”

I bought a Pibow Ninja from Amazon. Indeed the 3rd layer does not want to fit properly. How would I go about getting the re-designed layer 3 please?

Regards

---

<div class="post-metadata">

**Author:** ![gadgetoid](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/gadgetoid/32/13_2.png) [@gadgetoid](https://forums.pimoroni.com/u/gadgetoid)\
**Post date:** [February 16, 2015, 9:25am UTC](https://forums.pimoroni.com/t/layer-3-on-pibow-ninja/420/2 "2015-02-16T09:25:22Z")

</div>

We now sell them, so that you can upgrade your older PiBow for shiny new Pi 2 goodness:

[http://shop.pimoroni.com/products/b-pibow-upgrade-layer](http://shop.pimoroni.com/products/b-pibow-upgrade-layer)
