# Left red pixel on dot breakout not working

**URL:** <https://forums.pimoroni.com/t/left-red-pixel-on-dot-breakout-not-working/2792>\
**Category:** Support\
**Created:** [August 4, 2016, 5:04pm UTC](https://forums.pimoroni.com/t/left-red-pixel-on-dot-breakout-not-working/2792 "2016-08-04T17:04:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pi2003](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/pi2003/32/1613_2.png) [@pi2003](https://forums.pimoroni.com/u/pi2003)\
**Post date:** [August 4, 2016, 5:04pm UTC](https://forums.pimoroni.com/t/left-red-pixel-on-dot-breakout-not-working/2792/1 "2016-08-04T17:04:54Z")

</div>

I am trying to test my dot breakout but when I set the red pixel high only two lights on the right come on. My solder joints look good so is that red LED fried seeing as all the other colours on that pixel work.

Any help would be much appreciated  
William

---

<div class="post-metadata">

**Author:** ![sandyjmacdonald](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/sandyjmacdonald/32/393_2.png) [@sandyjmacdonald](https://forums.pimoroni.com/u/sandyjmacdonald)\
**Post date:** [August 9, 2016, 9:23am UTC](https://forums.pimoroni.com/t/left-red-pixel-on-dot-breakout-not-working/2792/2 "2016-08-09T09:23:08Z")

</div>

It sounds like that might be the case. Can you please email [support@pimoroni.com](mailto:support@pimoroni.com) and we can sort out a replacement for you?

---

<div class="post-metadata">

**Author:** ![RogueM](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/roguem/32/311_2.png) [@RogueM](https://forums.pimoroni.com/u/RogueM)\
**Post date:** [August 9, 2016, 6:26pm UTC](https://forums.pimoroni.com/t/left-red-pixel-on-dot-breakout-not-working/2792/3 "2016-08-09T18:26:21Z")

</div>

Split this topic on August 9, 2016, 6:26pm UTC

A post was split to a new topic: [Micro Dot pHAT issue](https://forums.pimoroni.com/t/micro-dot-phat-issue/2827)
