# Longer bolts for the PiBow Zero case?

**URL:** <https://forums.pimoroni.com/t/longer-bolts-for-the-pibow-zero-case/1805>\
**Category:** Raspberry Pi\
**Created:** [February 11, 2016, 4:42pm UTC](https://forums.pimoroni.com/t/longer-bolts-for-the-pibow-zero-case/1805 "2016-02-11T16:42:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![DarrenHill](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/darrenhill/32/771_2.png) [@DarrenHill](https://forums.pimoroni.com/u/DarrenHill)\
**Post date:** [February 11, 2016, 4:42pm UTC](https://forums.pimoroni.com/t/longer-bolts-for-the-pibow-zero-case/1805/1 "2016-02-11T16:42:40Z")

</div>

Does anyone know a good source of longer M2.5 nylon bolts for the PiBow Zero case?

The supplied ones are fine for the case itself, but if you add a pHat they’re irritatingly about 5-10mm too short to be able to secure the pHat as well. I’d only be looking at 4 (as I have two zero’s in PiBow cases, 2 for each) but I can only find a couple of distributors at all and they sell the things in bags of 100’s or more.

Or could Pimoroni be cajoled into adding a couple of longer bolts plus ideally a couple of short spacer cylinders (short bits of Teflon tubing would work fine, those I have already) to the PiBow zero kit?