# MCP9600 Thermocouple Amplifier Breakout

**URL:** <https://forums.pimoroni.com/t/mcp9600-thermocouple-amplifier-breakout/11787>\
**Category:** Support\
**Created:** [October 2, 2019, 3:25pm UTC](https://forums.pimoroni.com/t/mcp9600-thermocouple-amplifier-breakout/11787 "2019-10-02T15:25:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcusc22](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@marcusc22](https://forums.pimoroni.com/u/marcusc22)\
**Post date:** [October 2, 2019, 3:25pm UTC](https://forums.pimoroni.com/t/mcp9600-thermocouple-amplifier-breakout/11787/1 "2019-10-02T15:25:48Z")

</div>

I bought this board last week with a thermocoupler. I have installed the python library to read data from the board from the github repository, but do not know how to go about actually logging/getting to the data. I am using a raspberrypi 4 with the latest OS and have hooked up the mcp9600 board to the rpi.

For example, how would I display the data and store it in a database or output it to the screen? I would like to eventually use Node-Red to monitor the temp/humidity and from there write the results to a database.  
I am assuming I would need to run a python program to gather this info and display it accordingly.

Thanks,

Marcus

---

<div class="post-metadata">

**Author:** ![Crowbot](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/crowbot/32/5888_2.png) [@Crowbot](https://forums.pimoroni.com/u/Crowbot)\
**Post date:** [October 3, 2019, 4:37pm UTC](https://forums.pimoroni.com/t/mcp9600-thermocouple-amplifier-breakout/11787/2 "2019-10-03T16:37:15Z")

</div>

I’m still trying to figure this out but this is software for logging and displaying sensor data.

> **[nophead/EnviroPlusWeb](https://github.com/nophead/EnviroPlusWeb)**
>
> Web interface for Enviro+ sensor board plugged into a Raspberry PI - nophead/EnviroPlusWeb
