# Microbit no longer talks to its USB port

**URL:** <https://forums.pimoroni.com/t/microbit-no-longer-talks-to-its-usb-port/14244>\
**Category:** BBC Micro:Bit\
**Created:** [June 13, 2020, 5:53pm UTC](https://forums.pimoroni.com/t/microbit-no-longer-talks-to-its-usb-port/14244 "2020-06-13T17:53:59Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![technologyisnotdull](https://avatars.discourse-cdn.com/v4/letter/t/6f9a4e/32.png) [@technologyisnotdull](https://forums.pimoroni.com/u/technologyisnotdull)\
**Post date:** [June 13, 2020, 5:53pm UTC](https://forums.pimoroni.com/t/microbit-no-longer-talks-to-its-usb-port/14244/1 "2020-06-13T17:53:59Z")

</div>

I have a Microbit that no longer responds to the the USB, and I think the reset button.

The last Micropython program (radio strength detector) still works (but I am unable to change it - if it had been the beacon program that would not have been an issue).

I have tried it plugged in to a Windows 10 laptop and a Raspberry Pi (and checked the cables are sync not power with another microbit and a Circuit Playground device).

Has anyone else experienced a similar issue?

Any suggestions or is it a write off?

Thanks in advance.