# Minim pan tilt kit

**URL:** <https://forums.pimoroni.com/t/minim-pan-tilt-kit/10724>\
**Category:** Support\
**Created:** [June 21, 2019, 8:49pm UTC](https://forums.pimoroni.com/t/minim-pan-tilt-kit/10724 "2019-06-21T20:49:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![skypickle](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/skypickle/32/5528_2.png) [@skypickle](https://forums.pimoroni.com/u/skypickle)\
**Post date:** [June 21, 2019, 8:49pm UTC](https://forums.pimoroni.com/t/minim-pan-tilt-kit/10724/1 "2019-06-21T20:49:54Z")

</div>

I got this

> **[Mini Pan-Tilt Kit - Assembled with Micro Servos](https://www.adafruit.com/product/1967)**
>
> This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can ...

and successfully installed it into my bot. I could not use the pimoroni hat because the pi is nowhere near the servos.

Now I would like to use the pantilthat library in my code. Where on the GPIO should I plug in the two servos?

---

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [June 21, 2019, 9:32pm UTC](https://forums.pimoroni.com/t/minim-pan-tilt-kit/10724/2 "2019-06-21T21:32:26Z")

</div>

You can’t use that library without the hat, not as far as I know. The Pan Tilt Hat has a controller chip on it. Without the Pan Tilt Hat you will have to use PWM to control the servos.

> **[Controlling a Servo from the Raspberry Pi - RPi Labs](https://rpi.science.uoit.ca/lab/servo/)**
>
> \-

  
There are servo extension cables out there though,  
[https://www.adafruit.com/?q=servo](https://www.adafruit.com/?q=servo)
