# Model B+ Pibow space for adafruit pitft?

**URL:** <https://forums.pimoroni.com/t/model-b-pibow-space-for-adafruit-pitft/240>\
**Category:** Support\
**Created:** [December 26, 2014, 5:31am UTC](https://forums.pimoroni.com/t/model-b-pibow-space-for-adafruit-pitft/240 "2014-12-26T05:31:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![highjack](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/highjack/32/86_2.png) [@highjack](https://forums.pimoroni.com/u/highjack)\
**Post date:** [December 26, 2014, 5:31am UTC](https://forums.pimoroni.com/t/model-b-pibow-space-for-adafruit-pitft/240/1 "2014-12-26T05:31:11Z")

</div>

Hi guys,  
i have a Pi B+ and recently brought one of these screens:

> **[Adafruit PiTFT - 320x240 2.8" TFT+Touchscreen for Raspberry Pi](https://www.adafruit.com/product/1601)**
>
> Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI ...

my question is if I buy a Model B+ Pibow case, do I need to get or do anything extra to get my tft to fit in properly?

thanks!  
highjack