# ModuleNotFoundError: No module named 'bme680'

**URL:** <https://forums.pimoroni.com/t/modulenotfounderror-no-module-named-bme680/26363>\
**Category:** Support\
**Created:** [October 17, 2024, 11:33am UTC](https://forums.pimoroni.com/t/modulenotfounderror-no-module-named-bme680/26363 "2024-10-17T11:33:34Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![alphanumeric](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.pimoroni.com/alphanumeric/32/2729_2.png) [@alphanumeric](https://forums.pimoroni.com/u/alphanumeric)\
**Post date:** [October 18, 2024, 8:39am UTC](https://forums.pimoroni.com/t/modulenotfounderror-no-module-named-bme680/26363/12 "2024-10-18T08:39:31Z")

</div>

Right now most of my weather monitoring setups are Pico based. It’s still the same procedure, I take a reading, then display it.  
This is an old thread, that setup has been upgraded a few times.  
[Pi Pico based Weather Station Project - Discussion / Projects - Pimoroni Buccaneers](https://forums.pimoroni.com/t/pi-pico-based-weather-station-project/19503)  
This is the original Pi based setup I started with that morphed into the above.  
[My Enviro (code) based Weather Station Build - Discussion / Projects - Pimoroni Buccaneers](https://forums.pimoroni.com/t/my-enviro-code-based-weather-station-build/17915)  
This one I still have, it’s sitting on my desk in front of me. At some point I want to make a new one with bigger displays.  
[Three display weather graphing setup - Discussion / Projects - Pimoroni Buccaneers](https://forums.pimoroni.com/t/three-display-weather-graphing-setup/15921)

---

_[View the full topic](https://forums.pimoroni.com/t/modulenotfounderror-no-module-named-bme680/26363)._
