# Moisture Sensor Cable (35cm) for Grow Kit

**URL:** <https://forums.pimoroni.com/t/moisture-sensor-cable-35cm-for-grow-kit/15001>\
**Category:** Support\
**Created:** [September 26, 2020, 9:28am UTC](https://forums.pimoroni.com/t/moisture-sensor-cable-35cm-for-grow-kit/15001 "2020-09-26T09:28:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GA65W](https://avatars.discourse-cdn.com/v4/letter/g/6de8d8/32.png) [@GA65W](https://forums.pimoroni.com/u/GA65W)\
**Post date:** [September 26, 2020, 9:28am UTC](https://forums.pimoroni.com/t/moisture-sensor-cable-35cm-for-grow-kit/15001/1 "2020-09-26T09:28:26Z")

</div>

I’m finding that the length of these cables is a bit restrictive for the task I had in mind. Is it possible to use longer cables? If so where can they be acquired?

---

<div class="post-metadata">

**Author:** ![Richard238](https://avatars.discourse-cdn.com/v4/letter/r/c68b51/32.png) [@Richard238](https://forums.pimoroni.com/u/Richard238)\
**Post date:** [September 26, 2020, 2:59pm UTC](https://forums.pimoroni.com/t/moisture-sensor-cable-35cm-for-grow-kit/15001/2 "2020-09-26T14:59:44Z")

</div>

Wondering that myself.  
If I were to chop and solder in a longer length, what’s the max it can work up to?