# Multiple Pimoroni VL53L1X sensors

**URL:** <https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-sensors/13157>\
**Category:** Support\
**Created:** [February 27, 2020, 1:45pm UTC](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-sensors/13157 "2020-02-27T13:45:17Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![pete](https://avatars.discourse-cdn.com/v4/letter/p/3ab097/32.png) [@pete](https://forums.pimoroni.com/u/pete)\
**Post date:** [May 17, 2020, 11:06am UTC](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-sensors/13157/9 "2020-05-17T11:06:55Z")

</div>

Hi, one question, on the VL53L1X O couldn’t find a jumper to change the I2C address. On the backside it’s only print on one address 0x29 (default). So is there really a jumper (one the BME680 theres is on alsp printed 2 I2C addresses).  
So, if I want to use 2 VL53L1X Tofs, (as I understand the mail thread), I only have to run the sricpt once to change the address of one of my ToVs from 29 to 33?.  
My thx

Peter

---

_[View the full topic](https://forums.pimoroni.com/t/multiple-pimoroni-vl53l1x-sensors/13157)._